
For circuits requiring a 12 A protection point, Littelfuse 0452012.NRL provides time-lag (Slo-Blo) overcurrent protection in the 2410 / 6125 NANO2 platform. The rating is suited to telecom and networking equipment, provided the startup waveform and ambient rerating are checked against the latest curves. Its 50 A @ 72 VAC; 50 A @ 60 VDC; 100 A @ 75 VDC interrupting specification supports fault-current coordination when the applied voltage remains within 72 VAC / 75 VDC.
| Parameter | Value |
|---|---|
| Manufacturer / Series | Littelfuse / 452 Series |
| Part number | 0452012.NRL |
| Fuse characteristic | time-lag (Slo-Blo) |
| Rated current | 12 A |
| Voltage rating | 72 VAC / 75 VDC |
| Interrupting rating | 50 A @ 72 VAC; 50 A @ 60 VDC; 100 A @ 75 VDC |
| Nominal cold resistance | 0.0061 Ω |
| Nominal melting I²t | 260.46 A²s |
| Package | 2410 / 6125 NANO2 |
| Operating temperature | -55 °C to +125 °C |
| Agency / environmental | UL Recognized, CSA Certified, IEC/EN 60127 compliant, RoHS compliant and halogen-free |
For continuous service, begin the design review at no more than 75% of the 12 A rating, then apply the temperature-rerating curve and confirm the time-current response against startup and fault waveforms. The percentage is a design starting point, not a substitute for application testing.
Check that the prospective fault current stays within 50 A @ 72 VAC; 50 A @ 60 VDC; 100 A @ 75 VDC at the applied voltage. Use the manufacturer-recommended land pattern for the 2410 / 6125 NANO2 package and validate thermal behavior on the intended copper layout.
What distinguishes 0452012.NRL within the 452 Series?
Its defining electrical point is 12 A with a 72 VAC / 75 VDC maximum rating and time-lag (Slo-Blo) opening behavior.
Can 0452012.NRL be chosen by current rating alone?
No. Normal load, ambient temperature, pulse energy, time-current behavior and available short-circuit current all affect suitability.
Is 0452012.NRL intended for automated PCB assembly?
Yes. It is a surface-mount fuse; follow the latest soldering profile, pad layout and orientation guidance for the 2410 / 6125 NANO2 construction.
Packaging: 1,000-piece MR or 5,000-piece NR tape-and-reel; L suffix identifies the RoHS/halogen-free gold-cap version.
Ordering reference: start with 0452012.NRL and confirm the exact reel, termination and compliance suffix against current stock before purchase.
Design note: Resistance and I²t values are nominal unless identified as ratings. Verify the latest Littelfuse data sheet and curves before final release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd