
For circuits requiring a 1.5 A protection point, Littelfuse 045401.5NR provides time-lag (Slo-Blo) overcurrent protection in the 2410 / 6125 NANO2 platform. The rating is suited to power supplies with startup surge, provided the startup waveform and ambient rerating are checked against the latest curves. Its 50 A @ 125 VAC/VDC; 300 A @ 32 VDC interrupting specification supports fault-current coordination when the applied voltage remains within 125 VAC/VDC.
| Parameter | Value |
|---|---|
| Manufacturer / Series | Littelfuse / 454 Series |
| Part number | 045401.5NR |
| Fuse characteristic | time-lag (Slo-Blo) |
| Rated current | 1.5 A |
| Voltage rating | 125 VAC/VDC |
| Interrupting rating | 50 A @ 125 VAC/VDC; 300 A @ 32 VDC |
| Nominal cold resistance | 0.0930 Ω |
| Nominal melting I²t | 3.65 A²s |
| Package | 2410 / 6125 NANO2 |
| Operating temperature | -55 °C to +125 °C |
| Agency / environmental | UL Recognized, CSA Certified, IEC/EN 60127 compliant, RoHS compliant and halogen-free |
For continuous service, begin the design review at no more than 75% of the 1.5 A rating, then apply the temperature-rerating curve and confirm the time-current response against startup and fault waveforms. The percentage is a design starting point, not a substitute for application testing.
Check that the prospective fault current stays within 50 A @ 125 VAC/VDC; 300 A @ 32 VDC at the applied voltage. Use the manufacturer-recommended land pattern for the 2410 / 6125 NANO2 package and validate thermal behavior on the intended copper layout.
What distinguishes 045401.5NR within the 454 Series?
Its defining electrical point is 1.5 A with a 125 VAC/VDC maximum rating and time-lag (Slo-Blo) opening behavior.
Can 045401.5NR be chosen by current rating alone?
No. Normal load, ambient temperature, pulse energy, time-current behavior and available short-circuit current all affect suitability.
Is 045401.5NR intended for automated PCB assembly?
Yes. It is a surface-mount fuse; follow the latest soldering profile, pad layout and orientation guidance for the 2410 / 6125 NANO2 construction.
Packaging: 1,000-piece MR or 5,000-piece NR tape-and-reel; 454 is supplied as RoHS/halogen-free without an L suffix.
Ordering reference: start with 045401.5NR and confirm the exact reel, termination and compliance suffix against current stock before purchase.
Design note: Resistance and I²t values are nominal unless identified as ratings. Verify the latest Littelfuse data sheet and curves before final release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd