
The 0456025.ER fuse targets 25 A rails that need very fast-acting behavior without moving to a cartridge-style footprint. Its 100 A @ 125 VAC; DC breaking ratings vary with applied voltage interrupting specification supports fault-current coordination when the applied voltage remains within 72 VDC / 125 VAC. The -55 °C to +125 °C operating range broadens its use across compact power-conversion and control assemblies.
| Parameter | Value |
|---|---|
| Manufacturer / Series | Littelfuse / 456 Series |
| Part number | 0456025.ER |
| Fuse characteristic | very fast-acting |
| Rated current | 25 A |
| Voltage rating | 72 VDC / 125 VAC |
| Interrupting rating | 100 A @ 125 VAC; DC breaking ratings vary with applied voltage |
| Nominal cold resistance | 0.00192 Ω |
| Nominal melting I²t | 45 A²s |
| Package | 4012 NANO2 high-current SMD |
| Operating temperature | -55 °C to +125 °C |
| Agency / environmental | UL Recognized, RoHS compliant and lead-free |
For continuous service, begin the design review at no more than 75% of the 25 A rating, then apply the temperature-rerating curve and confirm the time-current response against startup and fault waveforms. The percentage is a design starting point, not a substitute for application testing.
Check that the prospective fault current stays within 100 A @ 125 VAC; DC breaking ratings vary with applied voltage at the applied voltage. Use the manufacturer-recommended land pattern for the 4012 NANO2 high-current SMD package and validate thermal behavior on the intended copper layout.
What distinguishes 0456025.ER within the 456 Series?
Its defining electrical point is 25 A with a 72 VDC / 125 VAC maximum rating and very fast-acting opening behavior.
Can 0456025.ER be chosen by current rating alone?
No. Normal load, ambient temperature, pulse energy, time-current behavior and available short-circuit current all affect suitability.
Is 0456025.ER intended for automated PCB assembly?
Yes. It is a surface-mount fuse; follow the latest soldering profile, pad layout and orientation guidance for the 4012 NANO2 high-current SMD construction.
Packaging: Specify the exact tape-and-reel ordering suffix when requesting stock or a quotation.
Ordering reference: start with 0456025.ER and confirm the exact reel, termination and compliance suffix against current stock before purchase.
Design note: Resistance and I²t values are nominal unless identified as ratings. Verify the latest Littelfuse data sheet and curves before final release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd