5HLE-125E Eaton Bussmann 4.8kV 125A Class E Medium Voltage Fuse
5HLE-125E Eaton Bussmann 4.8kV 125A Class E Medium Voltage Fuse

5HLE-125E Eaton Bussmann 4.8kV 125A Class E Medium Voltage Fuse

Share
pEaton Bussmann 5HLE-125E, 4.8kV 125A Class E medium voltage fuse, 63 kAIC interrupting. For transformer, feeder and switchgear protection./p
    • Product Details
    • Download

    5HLE-125E Eaton Bussmann 4.8kV 125A Class E Medium Voltage Fuse

    At a Glance
    • 4.8 kV rated voltage, 125 A rated current
    • 63 kAIC interrupting rating
    • Class E time-current characteristic

    The Eaton Bussmann 5HLE-125E is a medium voltage fuse with 4.8 kV rated voltage, 125 A rated current, 63 kAIC interrupting capacity, carrying a Class E time-current characteristic.

    Specifications

    General specifications
    UPC786670600121
    Product Length/Depth15.9 in
    Product Height3 in
    Product Width3 in
    Product Weight9 lb
    Electrical rating
    Amperage Rating125 A
    Interrupt rating63 kAIC
    Voltage rating4.8 kV
    General information
    ClassClass E
    Special featuresIndoor/outdoor, single barrel

    Standards Reference

    • ANSI C37.46

    Series Selection Table

    5HLE-125E series selection table
    Ampere ratings, dimensions and catalog numbers across the Medium Voltage Fuse family, reproduced from the Eaton Bussmann datasheet.

    Applications

    • Energy and utility distribution
    • Industrial equipment
    • Photovoltaic systems

    Selection Notes

    • Select against the available fault current at the installation point, not the load current — the interrupting rating has to exceed it with margin.
    • E-rated fuses follow a defined melting curve; pairing them with non-E-rated devices in the same feeder breaks coordination.

    Common Questions

    What are the ratings of the Eaton Bussmann 5HLE-125E?
    4.8 kV / 125 A, with a 63 kAIC interrupting rating.
    How much fault current can the 5HLE-125E interrupt?
    63 kAIC. The available fault current at the installation point must not exceed this value.
    What does Class E mean for the 5HLE-125E?
    Class E defines the fuse's time-current characteristic. E-rated fuses carry a defined melting curve so they coordinate predictably with upstream and downstream devices; mixing E and non-E ratings in one feeder defeats that coordination.
    Which standards does the 5HLE-125E comply with?
    It is referenced against ANSI C37.46 in the manufacturer data.
    How should I select the 5HLE-125E for a circuit?
    Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message