6125FA10A 10 A 125 Vac Fast-Acting Ceramic Fuse
6125FA10A 10 A 125 Vac Fast-Acting Ceramic Fuse

6125FA10A 10 A 125 Vac Fast-Acting Ceramic Fuse

Share
pEaton 6125FA10A: 10 A fast-acting SMD fuse, 6.3 x 2.5 mm (2410 imperial / 6125 metric), 125 Vac. Ordering code TR2/6125FA10A./p
    • Product Details
    • Download

    6125FA10A 10 A 125 Vac Fast-Acting Ceramic Fuse

    10 A at 125 Vac - fast-acting, 6.3 x 2.5 mm surface-mount, EIA/IS-722.
    Supplied as TR2/6125FA10A - 5,000 pieces on 12 mm tape-and-reel, one 13 inch (330 mm) reel.

    Key Parameters

    Part number6125FA10A
    Ordering codeTR2/6125FA10A
    Packaging5,000 pcs on 12 mm tape-and-reel, 13 in (330 mm) reel, EIA-481
    Design standardEIA/IS-722
    Typical cold resistance0.007 Ω
    Rated current10 A
    Typical voltage drop0.107 V
    Package6.3 x 2.5 mm (2410 imperial / 6125 metric)
    Voltage rating125 Vac / 86 Vdc
    Interrupting rating50 A at 125 Vac; 10,000 A at 86 Vdc
    Terminationsnickel/silver plated end terminations, solder immersion compatible
    Agency approvalCSA component acceptance 053787 C 000, Class 1422-30; UL Recognition Guide JDYX2, File E19180
    Typical melting I2t44 A²s

    Behaviour Under Load

    Heat leaves a chip fuse through the end terminations and into the copper, so the land pattern is part of the thermal design. A part on a narrow trace runs hotter than the same part on a pour, and opens earlier than the data sheet suggests.

    Decoding the Order Code

    6125FA is the family, 10A is the current rating - 10 A, written without a decimal point - and -R is the RoHS suffix.

    The Secondary Columns

    The secondary columns are where the layout decisions live. The cold resistance is 0.007 Ω, which is what the circuit sees before the element warms. Melting takes 44 A²s, so a fault has to deliver that much energy before the element even starts to go. At rated current the drop is 0.107 V.

    This Rating in Context

    At this rating the element is carrying real current and the cold resistance is in the tens of milliohms. The fuse no longer affects the circuit in normal operation, but the energy it has to clear on a fault is larger - which is where the interrupting rating starts to matter.

    The step below is 6125FA7A at 7 A, the step above is 6125FA12A at 12 A. The package and the land pattern are identical across the three; only the element changes.

    Before You Order

    This family quotes three voltage/current pairs, not one. The 125 V AC and 125 V DC ratings give 50 A and 300 A of interrupting capacity, while the 86 V DC rating gives 10,000 A. Pick the row that matches the voltage the circuit can actually apply, not the biggest number in the table.

    Match three things: the rating, the speed, and a voltage rating at least as high as the circuit can apply. The land pattern, the plating and the packaging prefix are purchasing details rather than electrical ones.

    Approvals

    CSA component acceptance 053787 C 000, Class 1422-30; UL Recognition Guide JDYX2, File E19180.

    For equipment exported to several markets, check each mark separately. The European and North American approvals on this family do not always cover the same current band.

    FAQ

    Does the land pattern affect the rating?
    Yes. Heat leaves through the terminations, so a part on a narrow trace runs hotter than the same part on a copper pour. Eaton specifies the rating at 25 °C on a reference land; a tight layout derates it.

    Can a chip fuse be replaced in the field?
    Not practically. It is soldered, and removing it usually lifts a pad. Treat it as a component that protects the board once - the board is designed around the fault being cleared, not around the fuse being changed.

    What does MSL mean for this part?
    Moisture sensitivity level - how long the part can sit out of its dry pack before reflow. Parts at MSL 1 have no floor life limit; higher levels need baking or dry storage before the reflow cycle.

    Design note: the figures above are Technical Data 2531, measured at 25 °C on the reference land pattern. Check the rating against the actual copper area and the ambient inside the enclosure before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message