CRJZ15N30G4FZ CR Micro 300V 72A N-Channel MOSFET TOLL
- Product Details
- Download
- 300 V / 72 A continuous drain current, TOLL package
- Rds(on) 16 mΩ typ, 19 mΩ max at VGS = 10 V
- Qg 100 nC and Ciss 4900 pF
- N-channel, Super Junction process
The CR Micro CRJZ15N30G4FZ is a 300 V 72 A N-channel MOSFET in a TOLL package, built on the Super Junction process. On-resistance is 16 mΩ typical and 19 mΩ maximum at a 10 V gate drive; gate charge is 100 nC with 4900 pF input capacitance; threshold voltage spans 3 to 5 V.
Key Specifications
| Drain-Source Voltage (VDS) | 300 V |
| Continuous Drain Current (ID) | 72 A |
| Rds(on) @ VGS = 10 V, typ. | 16 mΩ |
| Rds(on) @ VGS = 10 V, max. | 19 mΩ |
| Gate Threshold Voltage (VGS(th)) | 3 – 5 V |
| Total Gate Charge (Qg) | 100 nC |
| Input Capacitance (Ciss) | 4900 pF |
| Channel Polarity | N-channel |
| Process Family | Super Junction |
| Package | TOLL |
Process Technology
Super Junction — alternating p/n pillars in the drift region cancel part of the vertical field, so Rds(on) grows almost linearly with breakdown voltage instead of quadratically. Best Rds(on) per unit area in the 500–800 V band, at the cost of a harder body-diode reverse recovery and more sensitivity to dv/dt during commutation.
Applications
Power factor correction, LLC resonant stages, and LED drivers in offline supplies.
Selection Notes
- Rds(on) rises with junction temperature. Size the heatsink against the hot value given in the datasheet, not the 25 °C number in the table above.
- If the gate is driven below 10 V, check the 4.5 V Rds(on) line — parts without that rating are not characterised for logic-level drive.
- For high-frequency stages compare Qg and Ciss against the Rds(on) gain. A part one bin lower in Rds(on) often costs more switching loss than it saves in conduction.
- The body diode recovery of low-Rds(on) parts can be severe in bridge topologies. Verify dv/dt and dead time against the datasheet before dropping it into a half bridge.
Common Questions
Is the CRJZ15N30G4FZ an N-channel or P-channel device?
It is N-channel. The drain-source rating is 300 V.
Can the CRJZ15N30G4FZ be driven at 4.5 V?
No 4.5 V on-resistance figure is published for this part. It is characterised at 10 V gate drive, so use a driver that reaches 10 V.
What is the gate threshold voltage of the CRJZ15N30G4FZ?
VGS(th) is specified between 3 and 5 V. Below the lower figure the part is off; above the upper figure it is fully on at the rated current.
How much gate charge does the CRJZ15N30G4FZ need?
Qg is 100 nC. Size the driver against that figure at your switching frequency, and add the gate loop loss to the total dissipation budget.
What package does the CRJZ15N30G4FZ come in?
TOLL. Check the datasheet mechanical drawing for lead spacing and thermal pad dimensions before laying out the footprint.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
