CRSZ033N15N3Z CR Micro 150V 230A N-Channel MOSFET Toll
- Product Details
- Download
- 150 V / 230 A continuous drain current, Toll package
- Rds(on) 2.8 mΩ typ, 3.3 mΩ max at VGS = 10 V
- Qg 177.7 nC and Ciss 11504 pF
- N-channel, SGT process
The CR Micro CRSZ033N15N3Z is a 150 V 230 A N-channel MOSFET in a Toll package, built on the SGT process. On-resistance is 2.8 mΩ typical and 3.3 mΩ maximum at a 10 V gate drive; gate charge is 177.7 nC with 11504 pF input capacitance; threshold voltage spans 2.3 to 4.3 V.
Key Specifications
| Drain-Source Voltage (VDS) | 150 V |
| Continuous Drain Current (ID) | 230 A |
| Rds(on) @ VGS = 10 V, typ. | 2.8 mΩ |
| Rds(on) @ VGS = 10 V, max. | 3.3 mΩ |
| Gate Threshold Voltage (VGS(th)) | 2.3 – 4.3 V |
| Total Gate Charge (Qg) | 177.7 nC |
| Input Capacitance (Ciss) | 11504 pF |
| Channel Polarity | N-channel |
| Process Family | SGT |
| Package | Toll |
Process Technology
SGT (Shielded Gate Trench) — a trench gate with a grounded shield electrode beneath it. The shield cuts the gate-drain capacitance, so Qg and Crss drop sharply against a conventional trench at the same Rds(on). This is the workhorse process for 30–200 V and for 600–650 V high-frequency switching.
Applications
Telecom and server DC-DC stages, Class-D audio, PoE interfaces, and 48 V motor drive.
Selection Notes
- Rds(on) rises with junction temperature. Size the heatsink against the hot value given in the datasheet, not the 25 °C number in the table above.
- If the gate is driven below 10 V, check the 4.5 V Rds(on) line — parts without that rating are not characterised for logic-level drive.
- For high-frequency stages compare Qg and Ciss against the Rds(on) gain. A part one bin lower in Rds(on) often costs more switching loss than it saves in conduction.
- The body diode recovery of low-Rds(on) parts can be severe in bridge topologies. Verify dv/dt and dead time against the datasheet before dropping it into a half bridge.
Common Questions
Is the CRSZ033N15N3Z an N-channel or P-channel device?
It is N-channel. The drain-source rating is 150 V.
Can the CRSZ033N15N3Z be driven at 4.5 V?
No 4.5 V on-resistance figure is published for this part. It is characterised at 10 V gate drive, so use a driver that reaches 10 V.
What is the gate threshold voltage of the CRSZ033N15N3Z?
VGS(th) is specified between 2.3 and 4.3 V. Below the lower figure the part is off; above the upper figure it is fully on at the rated current.
How much gate charge does the CRSZ033N15N3Z need?
Qg is 177.7 nC. Size the driver against that figure at your switching frequency, and add the gate loop loss to the total dissipation budget.
What package does the CRSZ033N15N3Z come in?
Toll. Check the datasheet mechanical drawing for lead spacing and thermal pad dimensions before laying out the footprint.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
