CRTM025N04L2-G CR Micro 40V 80A N-Channel MOSFET PDFN5×6
- Product Details
- Download
- 40 V / 80 A continuous drain current, PDFN5×6 package
- Rds(on) 2 mΩ typ, 2.5 mΩ max at VGS = 10 V
- Ciss 5385 pF
- N-channel, Trench process
The CR Micro CRTM025N04L2-G is a 40 V 80 A N-channel MOSFET in a PDFN5×6 package, built on the Trench process. On-resistance is 2 mΩ typical and 2.5 mΩ maximum at a 10 V gate drive; 3 mΩ typical at 4.5 V, so it also works from a logic-level driver; threshold voltage spans 1 to 2 V.
Key Specifications
| Drain-Source Voltage (VDS) | 40 V |
| Continuous Drain Current (ID) | 80 A |
| Rds(on) @ VGS = 10 V, typ. | 2 mΩ |
| Rds(on) @ VGS = 10 V, max. | 2.5 mΩ |
| Rds(on) @ VGS = 4.5 V, typ. | 3 mΩ |
| Rds(on) @ VGS = 4.5 V, max. | 4 mΩ |
| Gate Threshold Voltage (VGS(th)) | 1 – 2 V |
| Input Capacitance (Ciss) | 5385 pF |
| Channel Polarity | N-channel |
| Process Family | Trench |
| Package | PDFN5×6 |
Same-Rating Selection Table
| Part Number | VDS | ID | Rds(on) typ | Rds(on) max | Qg | Ciss | Package |
|---|---|---|---|---|---|---|---|
| CRSM005N04L6Z | 40V | 430A | 0.49 | 0.59 | 112.5 | 7920 | PDFN5×6 |
| CRSM006N04N6Z | 40V | 430A | 0.54 | 0.68 | 112.5 | 7920 | PDFN5×6 |
| CRSM008N04L2 | 40V | 420A | 0.57 | 0.71 | 140.9 | 8070 | PDFN5×6 |
| CRSM009N04L2 | 40V | 320A | 0.75 | 1 | 96.2 | 6092 | PDFN5×6 |
| HGQ01N04A-G | 40V | 320A | 0.85 | 1 | 113.4 | 6120 | PDFN5×6 |
| CRSM010N04L2 | 40V | 257A | 0.9 | 1.1 | 98.1 | 5307 | PDFN5×6 |
| HGQ011N04A-G | 40V | 320A | 0.92 | 1.15 | 108 | 7927 | PDFN5×6 |
| CRSM014N04L2 | 40V | 240A | 1.1 | 1.4 | 92.6 | 5660 | PDFN5×6 |
| HGQ014N04A-G | 40V | 200A | 1.1 | 1.45 | 66 | 3873 | PDFN5×6 |
| HGQ014N04B-G | 40V | 200A | 1.1 | 1.4 | 93.7 | 5131 | PDFN5×6 |
| CRSM020N04L2 | 40V | 80A | 1.4 | 1.7 | 85 | 5631 | PDFN5×6 |
| CRTM021N04L2-G | 40V | 60A | 1.6 | 2 | 7169.43 | PDFN5×6 | |
| HGQ024N04A | 40V | 134A | 1.6 | 2.4 | 63.4 | 3020 | PDFN5×6 |
| CRTM025N04L2-G | 40V | 80A | 2 | 2.5 | 5385 | PDFN5×6 | |
| CRSM023N04N2Z | 40V | 120A | 2.1 | 2.6 | 43 | 2950 | PDFN5×6 |
| CRTM030N04L | 40V | 80A | 2.1 | 2.5 | 126 | 5734 | PDFN5×6 |
| CRTM035N04L2-G | 40V | 60A | 2.7 | 3.4 | 68.3 | 3312 | PDFN5×6 |
| CRSM037N04L2Q | 40V | 80A | 3.2 | 3.7 | 23 | 1449 | PDFN5×6 |
| CRSM045N04N2Z | 40V | 50A | 3.7 | 5.6 | 30 | 2110 | PDFN5×6 |
| CRSM046N04N2Z | 40V | 70A | 3.7 | 4.6 | 23 | 1580 | PDFN5×6 |
| CRTM045N04L2P | 40V | 80A | 3.8 | 4.5 | 57.4 | 3006 | PDFN5×6 |
| CRSM056N04L2Q | 40V | 50A | 4.4 | 5.5 | 21 | 1491 | PDFN5×6 |
| CRSM055N04N2Z | 40V | 50A | 4.5 | 5.5 | 23 | 1580 | PDFN5×6 |
| CRTM063N04L | 40V | 72A | 4.5 | 6.3 | 47 | 2245 | PDFN5×6 |
| CRSM076N04N2Z | 40V | 50A | 5.8 | 7.6 | 16 | 1122 | PDFN5×6 |
25 part numbers share the same 40 / PDFN5×6 / N rating — sorted by rds(on) typ.
Process Technology
Trench — the gate is etched vertically into the drift region, multiplying channel width per unit area. Lowest Rds(on) in the sub-200 V range; the trade-off is higher Qg and a more fragile body diode under hard commutation.
Applications
Low-voltage DC-DC converters, load switches, battery protection, and brushed or stepper motor drive.
Selection Notes
- Rds(on) rises with junction temperature. Size the heatsink against the hot value given in the datasheet, not the 25 °C number in the table above.
- If the gate is driven below 10 V, check the 4.5 V Rds(on) line — parts without that rating are not characterised for logic-level drive.
- For high-frequency stages compare Qg and Ciss against the Rds(on) gain. A part one bin lower in Rds(on) often costs more switching loss than it saves in conduction.
- The body diode recovery of low-Rds(on) parts can be severe in bridge topologies. Verify dv/dt and dead time against the datasheet before dropping it into a half bridge.
Common Questions
Is the CRTM025N04L2-G an N-channel or P-channel device?
It is N-channel. The drain-source rating is 40 V.
Can the CRTM025N04L2-G be driven from a 4.5 V logic-level gate signal?
Yes. The datasheet characterises Rds(on) at 4.5 V: 3 mΩ typical and 4 mΩ maximum.
What is the gate threshold voltage of the CRTM025N04L2-G?
VGS(th) is specified between 1 and 2 V. Below the lower figure the part is off; above the upper figure it is fully on at the rated current.
What package does the CRTM025N04L2-G come in?
PDFN5×6. Check the datasheet mechanical drawing for lead spacing and thermal pad dimensions before laying out the footprint.
How do I choose between the 25 part numbers in this rating group?
All 25 share the same voltage and package class. Sort by on-resistance first, then check gate charge: the lowest Rds(on) part is not automatically the best choice if the stage switches at high frequency. The table above lists them in ascending Rds(on) order.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
