CS19N40ANR CR Micro 400V 19A N-Channel MOSFET TO-3PN
- Product Details
- Download
- 400 V / 19 A continuous drain current, TO-3PN package
- Rds(on) 230 mΩ typ, 300 mΩ max at VGS = 10 V
- Qg 39 nC and Ciss 1919 pF
- N-channel, Planar process
The CR Micro CS19N40ANR is a 400 V 19 A N-channel MOSFET in a TO-3PN package, built on the Planar process. On-resistance is 230 mΩ typical and 300 mΩ maximum at a 10 V gate drive; gate charge is 39 nC with 1919 pF input capacitance; threshold voltage spans 2 to 4 V.
Key Specifications
| Drain-Source Voltage (VDS) | 400 V |
| Continuous Drain Current (ID) | 19 A |
| Rds(on) @ VGS = 10 V, typ. | 230 mΩ |
| Rds(on) @ VGS = 10 V, max. | 300 mΩ |
| Gate Threshold Voltage (VGS(th)) | 2 – 4 V |
| Total Gate Charge (Qg) | 39 nC |
| Input Capacitance (Ciss) | 1919 pF |
| Channel Polarity | N-channel |
| Process Family | Planar |
| Package | TO-3PN |
Process Technology
Planar — the gate sits flat on the die surface. Lower channel density than trench designs, but a wider safe operating area, stronger avalanche withstand and simpler gate drive. Preferred for high-voltage and rugged industrial loads where robustness outranks on-resistance.
Applications
Power factor correction, LLC resonant stages, and LED drivers in offline supplies.
Selection Notes
- Rds(on) rises with junction temperature. Size the heatsink against the hot value given in the datasheet, not the 25 °C number in the table above.
- If the gate is driven below 10 V, check the 4.5 V Rds(on) line — parts without that rating are not characterised for logic-level drive.
- For high-frequency stages compare Qg and Ciss against the Rds(on) gain. A part one bin lower in Rds(on) often costs more switching loss than it saves in conduction.
- The body diode recovery of low-Rds(on) parts can be severe in bridge topologies. Verify dv/dt and dead time against the datasheet before dropping it into a half bridge.
Common Questions
Is the CS19N40ANR an N-channel or P-channel device?
It is N-channel. The drain-source rating is 400 V.
Can the CS19N40ANR be driven at 4.5 V?
No 4.5 V on-resistance figure is published for this part. It is characterised at 10 V gate drive, so use a driver that reaches 10 V.
What is the gate threshold voltage of the CS19N40ANR?
VGS(th) is specified between 2 and 4 V. Below the lower figure the part is off; above the upper figure it is fully on at the rated current.
How much gate charge does the CS19N40ANR need?
Qg is 39 nC. Size the driver against that figure at your switching frequency, and add the gate loop loss to the total dissipation budget.
What package does the CS19N40ANR come in?
TO-3PN. Check the datasheet mechanical drawing for lead spacing and thermal pad dimensions before laying out the footprint.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
