CS5755ASCO CR Micro 500V 5A IPM WSOP13
- Product Details
- Download
- 500 V / 5 A output rating, WSOP13
- Half-bridge topology
- Integrated over-current, fault output, short-circuit
The CR Micro CS5755ASCO is a 500 V 5 A intelligent power module in a WSOP13 package, wired as a half-bridge using MOSFET power stages. Protection on board covers over-current, fault output and short-circuit. Designed for Fans and Hair dryer.
Key Specifications
| Blocking Voltage (VDSS / VCES) | 500 V |
| Output Current (ID / IC) | 5 A |
| Power Stage | MOSFET |
| Circuit Configuration | half-bridge |
| Rds(on) typ. | 1.2 mΩ |
| Rds(on) max. | 1.6 mΩ |
| Built-in Protection | ocp, fo, sd |
| Typical Application | Fans and Hair dryer |
| Package | WSOP13 |
Same-Rating Selection Table
| Part Number | VDSS/VCES | ID/IC | Configuration | VCE(sat) typ | Package |
|---|---|---|---|---|---|
| CRM50TD02R1 | 500V | 2A | half-bridge | QFN 7x7 | |
| CS5752BSCO | 500V | 2A | half-bridge | TWSOP13 | |
| CRM50TE03FA | 500V | 3A | half-bridge | 1.2V | SOP-11 |
| CRM50TD04R1 | 500V | 4A | half-bridge | QFN 7x7 | |
| CRM50TE04FA | 500V | 4A | half-bridge | SOP-11 | |
| CS5754BSCO | 500V | 4A | half-bridge | TWSOP13 | |
| CS5754SCO | 500V | 4A | half-bridge | TWSOP13 | |
| CS5754SDQ | 500V | 4A | half-bridge | QFN18 | |
| CS5754STF | 500V | 4A | half-bridge | QFN18 | |
| CRM50TE05FA | 500V | 5A | half-bridge | SOP-11 | |
| CRM50TF05FA | 500V | 5A | half-bridge | ESOP-9 | |
| CRM50TF05GA | 500V | 5A | half-bridge | ESOP-9 | |
| CS5755ASCO | 500V | 5A | half-bridge | WSOP13 | |
| CS5755BSCO | 500V | 5A | half-bridge | TWSOP13 | |
| CS5755SCO | 500V | 5A | half-bridge | TWSOP13 | |
| CS5755SDQ | 500V | 5A | half-bridge | QFN18 | |
| CRM50TD06R1 | 500V | 6A | half-bridge | QFN 7x7 | |
| CRM50TE07FA | 500V | 7A | half-bridge | SOP-11 | |
| CRM50TF07FA | 500V | 7A | half-bridge | ESOP-9 |
19 part numbers share the same 500 / half-bridge rating — sorted by current.
Applications
Fans and Hair dryer — the module's rating and package are sized for this class of load.
Selection Notes
- The module integrates gate drive and protection. The input side expects logic-level PWM, not a raw gate signal — do not add an external driver.
- Fault output is open-drain on most of these modules. Fit a pull-up and latch it in the controller, otherwise the module restarts into a fault.
- Check the dead time and minimum pulse width in the datasheet. The internal interlock is a protection layer, not a substitute for correct timing.
- Thermal design dominates reliability. Use the module's internal thermistor or the case-to-heatsink path to size the heatsink for the actual switching loss.
Common Questions
What topology does the CS5755ASCO implement?
It is a half-bridge module rated 500 V / 5 A.
What protection is built into the CS5755ASCO?
The module integrates over-current, fault output, short-circuit. External fault handling still has to latch the fault signal and sequence a safe restart.
What applications is the CS5755ASCO intended for?
Fans and Hair dryer — a match for the module's power rating and package thermal path.
What package does the CS5755ASCO come in?
WSOP13. Check the datasheet mechanical drawing for lead spacing and thermal pad dimensions before laying out the footprint.
How do I choose between the 19 part numbers in this rating group?
All 19 share the same voltage and package class. Sort by on-resistance first, then check gate charge: the lowest Rds(on) part is not automatically the best choice if the stage switches at high frequency. The table above lists them in ascending Rds(on) order.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
