Welcome to our company!
Eaton ABC-1-1/2-R 1.5 A Fast-Blow 1/4 x 1-1/4 in Ceramic Fuse
Share
pEaton ABC-1-1/2-R — 1.5 A, 250 V, fast-acting ceramic cartridge fuse, 100 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc interrupting./p
- Product Details
- Download
Eaton ABC-1-1/2-R 1.5 A Fast-Blow 1/4 x 1-1/4 in Ceramic Fuse
Eaton ABC-1-1/2-R 1.5 A Fast-Blow 1/4 x 1-1/4 in Ceramic Fuse belongs to the Eaton range. It carries 1.5 A, rated 250 Vac, uses a fast-acting element, in a ceramic body.
Technical Data
| Parameter | Rating |
|---|---|
| Part number | ABC-1-1/2-R |
| Voltage rating | 250 Vac |
| AC interrupting rating | 100 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc |
| Design standard | UL 248-14 |
| Body | Ceramic tube, 1/4 x 1-1/4 in (6.4 x 31.7 mm) |
| Typical melting I2t | 1.163 A²s |
| Element | single element |
| End caps | nickel-plated brass |
| Rated current | 1.5 A (1-1/2 A) |
| Typical voltage drop | 0.28 V |
| Voltage rating, DC | 125 Vdc |
| Typical DC cold resistance | 0.131 Ω |
Design Notes
- Interrupting capability is 100 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc — confirm the circuit's prospective fault current stays below this.
- Fast element suits resistive and semiconductor loads rather than motors with high inrush.
- Because it opens within milliseconds, downstream semiconductors see less let-through energy.
- Ceramic body holds higher breaking capacity than glass at the same footprint.
- It is the usual choice where prospective fault current is high.
- Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 1.5 A to stop nuisance trips — fix the cause instead.
Where It Is Used
Typical places this fuse turns up:
- EV
Common Questions
What are the ratings of the ABC-1-1/2-R?
1.5 A continuous at 250 Vac, interrupting rating 100 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc.
Is the ABC-1-1/2-R fast-acting or time-delay?
It is fast-acting. Expect it to open quickly on overload.
Can the ABC-1-1/2-R be used on a higher fault-current circuit?
No — its interrupting rating is 100 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
