Welcome to our company!
Eaton ABC-10-R 10 A Fast-Blow Cartridge Fuse, Ceramic, 1/4 x 1-1/4 in
Share
pEaton ABC-10-R — 10 A, 250 V, fast-acting ceramic cartridge fuse, 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc interrupting./p
- Product Details
- Download
Eaton ABC-10-R 10 A Fast-Blow Cartridge Fuse, Ceramic, 1/4 x 1-1/4 in
Eaton ABC-10-R 10 A Fast-Blow Cartridge Fuse, Ceramic, 1/4 x 1-1/4 in belongs to the Eaton range. It carries 10 A, rated 250 Vac, uses a fast-acting element, in a ceramic body.
Technical Data
| Parameter | Rating |
|---|---|
| Part number | ABC-10-R |
| Typical voltage drop | 0.15 V |
| AC interrupting rating | 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc |
| End caps | nickel-plated brass |
| Voltage rating | 250 Vac |
| Typical DC cold resistance | 0.011 Ω |
| Rated current | 10 A |
| Typical melting I2t | 208.8 A²s |
| Element | single element |
| Body | Ceramic tube, 1/4 x 1-1/4 in (6.4 x 31.7 mm) |
| Voltage rating, DC | 125 Vdc |
| Design standard | UL 248-14 |
Design Notes
- Interrupting capability is 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc — confirm the circuit's prospective fault current stays below this.
- Fast element suits resistive and semiconductor loads rather than motors with high inrush.
- Because it opens within milliseconds, downstream semiconductors see less let-through energy.
- Ceramic body holds higher breaking capacity than glass at the same footprint.
- It is the usual choice where prospective fault current is high.
- Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 10 A to stop nuisance trips — fix the cause instead.
Where It Is Used
Typical places this fuse turns up:
- EV
- surge
Common Questions
What are the ratings of the ABC-10-R?
10 A continuous at 250 Vac, interrupting rating 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc.
Is the ABC-10-R fast-acting or time-delay?
It is fast-acting. Expect it to open quickly on overload.
Can the ABC-10-R be used on a higher fault-current circuit?
No — its interrupting rating is 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
