Eaton ABC-5-R Fast-Acting Fuse 5 A 250 Vac - 1/4 x 1-1/4 in
Eaton ABC-5-R Fast-Acting Fuse 5 A 250 Vac - 1/4 x 1-1/4 in

Eaton ABC-5-R Fast-Acting Fuse 5 A 250 Vac - 1/4 x 1-1/4 in

Share
pEaton ABC-5-R — 5 A, 250 V, fast-acting fuse, 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc interrupting./p
    • Product Details
    • Download

    Eaton ABC-5-R Fast-Acting Fuse 5 A 250 Vac - 1/4 x 1-1/4 in

    Eaton ABC-5-R Fast-Acting Fuse 5 A 250 Vac - 1/4 x 1-1/4 in belongs to the Eaton range. It carries 5 A, rated 125 Vdc, uses a fast-acting element.

    Technical Data

    ParameterRating
    Part numberABC-5-R
    BodyCeramic tube, 1/4 x 1-1/4 in (6.4 x 31.7 mm)
    Typical voltage drop0.22 V
    Elementsingle element
    Typical melting I2t32.83 A²s
    Design standardUL 248-14
    Voltage rating, DC125 Vdc
    Voltage rating250 Vac
    AC interrupting rating200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc
    Rated current5 A
    End capsnickel-plated brass
    Typical DC cold resistance0.026 Ω

    Design Notes

    • Interrupting capability is 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Working voltage must stay at or below 125 Vdc; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 5 A to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV
    • surge

    Common Questions

    What are the ratings of the ABC-5-R?

    5 A continuous at 125 Vdc, interrupting rating 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc.

    Is the ABC-5-R fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the ABC-5-R be used on a higher fault-current circuit?

    No — its interrupting rating is 200 A at 250 Vac; 10,000 A at 125 Vac; 10,000 A at 125 Vdc. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products