Eaton AMLV18V16C4500 1812 Chip Varistor 16 Vdc
Eaton AMLV18V16C4500 1812 Chip Varistor 16 Vdc

Eaton AMLV18V16C4500 1812 Chip Varistor 16 Vdc

Share
AMLV18V16C4500: multilayer varistor ESD suppressor, 21.6-26.4 V varistor voltage, 16 V working, 40 V clamp, 4500 pF, 2.4 J.
    • Product Details
    • Download

    Eaton AMLV18V16C4500 1812 Chip Varistor 16 Vdc

    AMLV18V16C4500 at a glance: multilayer varistor ESD suppressor, 21.6-26.4 V varistor voltage, 16 V working, 40 V clamp, 4500 pF, 2.4 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberAMLV18V16C4500
    Working voltage, DC16 Vdc
    Working voltage, AC12 Vac
    Varistor voltage at 1 mA21.6 V to 26.4 V
    Clamping voltage at 1 A40 V
    Energy absorption, 10/1000 us2.4 J
    Peak current, 8/20 us800 A
    Typical capacitance at 1 MHz4500 pF
    Vjump (5 min)24.5 V
    WLD (10 pulses)6 J
    Leakage current at working voltagemax. 20 uA
    Package1812 (4532 metric)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1078

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    A chip varistor is a ceramic body with two metal terminations, so it looks like a capacitor and behaves like one until the transient arrives. That is why the capacitance column is quoted on every page: it is the parameter that decides whether the part can sit on a data line.

    The clamp column works out at 1.67 times the varistor voltage: 40 V at the rated current against 24 V at 1 mA. That ratio is what the downstream part has to survive, not the 24 V figure on the label.

    Standing at 16 V the leakage is at most 20 uA, which is 0.32 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    The 4500 pF typical capacitance is the cost of the clamp. On a power rail it is irrelevant; on a data line it is the reason to look at the low-capacitance versions of the same voltage.

    Within the AMLV family this is item 23 of 28 in the Eaton catalogue.

    Positioning in the Range

    Place it on the connector side of any series impedance. A varistor behind a common-mode choke protects the choke and not the connector, which is usually the wrong way round.

    • A varistor is not a zener. It has no sharp knee, so it conducts a little at the working voltage and the leakage column is the honest measure of that.
    • These parts are halogen free and RoHS compliant without exemptions, which matters for automotive and appliance programmes.

    Frequently Asked Questions

    What does the capacitance do to my signal?
    It loads the line. At 1 MHz a 100 pF part is about 1.6 kOhm of reactance, which is harmless on a power rail and fatal on a 480 Mbit USB pair. Choose a low-capacitance version when the line carries data.

    How many ESD strikes can it take?
    The ESD rating is a qualification level, not a lifetime count. IEC 61000-4-2 level 4 is 8 kV contact and 15 kV air, and the part is expected to survive repeated strikes at that level because the energy per strike is small.

    Does the clamp voltage scale with the surge current?
    Yes. The clamp column is quoted at a stated current, usually 1 A. At ten times that current the residual voltage is higher, so read the V-I curve rather than the single number when the surge is large.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products