Eaton C515-3.5-R - 3.5 A Time-Delay Glass Fuse, 125 Vac
Eaton C515-3.5-R - 3.5 A Time-Delay Glass Fuse, 125 Vac

Eaton C515-3.5-R - 3.5 A Time-Delay Glass Fuse, 125 Vac

Share
pEaton C515-3.5-R — 3.5 A, 125 V, time-delay glass cartridge fuse, 400 A at 125 Vac interrupting./p
    • Product Details
    • Download

    Eaton C515-3.5-R - 3.5 A Time-Delay Glass Fuse, 125 Vac

    Eaton C515-3.5-R - 3.5 A Time-Delay Glass Fuse, 125 Vac belongs to the Eaton range. It carries 3.5 A, rated 125 Vac, uses a time-delay element, in a glass body.

    Technical Data

    ParameterRating
    ParameterValue
    Orderable part numberC515-3.5-R
    Rated current3.5 A
    Voltage rating125 Vac
    Interrupting rating400 A at 125 Vac
    Typical DC cold resistance0.028 ohm
    Typical melting I2t149.279 A²s
    Max voltage drop at rated current130 mV
    Body5 x 15 mm axial
    TerminalsTinned copper leads
    SpeedTime-Delay (UL 248-14)
    RoHSCompliant (-R suffix)

    Design Notes

    • Interrupting capability is 400 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
    • Time-delay element rides through motor starting and capacitive inrush without nuisance opening.
    • Startup surges of several times rated current are tolerated for a short window.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 125 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 3.5 A to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV
    • transformer

    Common Questions

    What are the ratings of the C515-3.5-R?

    3.5 A continuous at 125 Vac, interrupting rating 400 A at 125 Vac.

    Is the C515-3.5-R fast-acting or time-delay?

    It is time-delay. It tolerates short inrush surges.

    Can the C515-3.5-R be used on a higher fault-current circuit?

    No — its interrupting rating is 400 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message