
| Parameter | Value |
|---|---|
| Orderable part number | CMS1-13-R |
| Open circuit inductance (OCL) | 166 uH minimum, (1-2) & (4-3) |
| I rms (max) | 1 A |
| DCR typical @ 20 °C (1-2) | 0.138 ohm |
| DCR typical @ 20 °C (4-3) | 0.138 ohm |
| Leakage inductance typ | 1.83 uH |
| Interwinding capacitance typ | 3.1 pF |
| Package | CMS series, surface mount |
| Operating temperature | 160 °C maximum |
| RoHS | Compliant (-R suffix) |
A common-mode choke puts the same current through both windings in the same direction, so the differential signal passes through untouched while the common-mode noise sees the full impedance. It is the cheapest way to bring a switching node inside the emissions limit.
Impedance rolls off with frequency and with bias, so the value on the data sheet is a starting point rather than a guarantee. Model the network, then measure. 166 uH is the working middle of the CMS range: enough inductance to hold down the ripple on a rail, small enough that the 1 A Irms rating is not the thing limiting the design.
CMS 是贴片共模电感,CMS1 / CMS2 / CMS3 三个尺寸系列,4.5 uH 到 1310 uH。
Irms 1 A is the thermal limit - a 40 °C temperature rise at 85 °C ambient. With 0.138 ohm of DCR the winding loss at that current is 0.14 W. CMS1 is the smallest of the three CMS footprints
What is the operating temperature?
The CMS series is rated to 160 °C maximum, with inductance values sustained up to that temperature.
Can I put it on a power line?
Only if the rated current covers the line. CMS is a signal-level series - for amps of current look at CMLA or a larger package.
What is the operating temperature?
The CMS series is rated to 160 °C maximum, with inductance values sustained up to that temperature.
Design note: pick the choke by impedance at the noise
frequency, then confirm DCR and rated current against the signal or the rail.

Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd