
| Parameter | Value |
|---|---|
| Orderable part number | CMS3-2-R |
| Open circuit inductance (OCL) | 45 uH minimum, (1-2) & (4-3) |
| I rms (max) | 5.1 A |
| DCR typical @ 20 °C (1-2) | 0.006 ohm |
| DCR typical @ 20 °C (4-3) | 0.006 ohm |
| Leakage inductance typ | 0.46 uH |
| Interwinding capacitance typ | 3.05 pF |
| Package | CMS series, surface mount |
| Operating temperature | 160 °C maximum |
| RoHS | Compliant (-R suffix) |
The impedance figure is measured across the winding pair, which is exactly the common-mode path. That is why these parts are picked by impedance at the noise frequency rather than by inductance.
For a DC-DC output filter this is the part that decides whether the noise stays inside the conducted limits, and how much margin the design keeps at the top of the load step. 45 uH is the working middle of the CMS range: enough inductance to hold down the ripple on a rail, small enough that the 5.1 A Irms rating is not the thing limiting the design.
CMS 是贴片共模电感,CMS1 / CMS2 / CMS3 三个尺寸系列,4.5 uH 到 1310 uH。
Irms 5.1 A is the thermal limit - a 40 °C temperature rise at 85 °C ambient. With 0.006 ohm of DCR the winding loss at that current is 0.16 W. CMS3 is the largest CMS footprint, with the lowest DCR of the three
Can I put it on a power line?
Only if the rated current covers the line. CMS is a signal-level series - for amps of current look at CMLA or a larger package.
Does it affect my signal?
Only through DCR and the small amount of leakage inductance. The differential signal is not filtered by design.
Does it affect my signal?
Only through DCR and the small amount of leakage inductance. The differential signal is not filtered by design.
Design note: pick the choke by impedance at the noise
frequency, then confirm DCR and rated current against the signal or the rail.

Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd