
| Parameter | Value |
|---|---|
| Orderable part number | CTX1-4P-R |
| Inductance, parallel | 1.1 uH |
| Inductance, series | 4.39 uH |
| DC current, parallel | 5.9 A |
| DC current, series | 2.95 A |
| DCR, parallel maximum | 8 mOhm |
| DCR, series maximum | 33 mOhm |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data DS4314 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
the data sheet states it.
Wired as an inductor it filters or stores energy; wired as a transformer it couples two windings on one core. The parallel and series columns on this page are the inductor ratings, and the turns ratio for transformer use is fixed by the construction.
Parallel gives 1.1 uH at 5.9 A; series gives 4.39 uH at 2.95 A. The inductance ratio is about 3.99 to 1, which is the turns-squared rule at work.
Within the CTX1 family this is item 4 of 4 in the Eaton catalogue.
The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.
What is the volt-second rating?
The flux swing the core can take per switching cycle before saturation. At a given switching frequency it converts directly to the maximum applied voltage.
Parallel or series – which do I use?
Parallel for high current at low inductance, series for the opposite. The two windings are identical, so series connection quadruples the inductance and halves the current rating.
Can it be used as a transformer?
Yes, the two windings are on the same core, so it is a 1:1 transformer when used that way. The isolation between windings is not a safety barrier; check the construction note before using it across a mains barrier.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd