
| Parameter | Value |
|---|---|
| Orderable part number | CTX10-4P-R |
| Inductance, parallel | 9.88 uH |
| Inductance, series | 39.5 uH |
| DC current, parallel | 2.5 A |
| DC current, series | 1.25 A |
| DCR, parallel maximum | 47 mOhm |
| DCR, series maximum | 187 mOhm |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data DS4314 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
the data sheet states it.
A toroid has no air gap in the usual sense: the gap is distributed through the powder core, which is why the saturation curve is soft and why these parts hold inductance further into the current range than a gapped ferrite.
Parallel gives 9.88 uH at 2.5 A; series gives 39.5 uH at 1.25 A. The inductance ratio is about 4 to 1, which is the turns-squared rule at work.
Within the CTX10 family this is item 4 of 4 in the Eaton catalogue.
The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.
Parallel or series – which do I use?
Parallel for high current at low inductance, series for the opposite. The two windings are identical, so series connection quadruples the inductance and halves the current rating.
Why four times the inductance and not twice?
Inductance scales with the square of the turns. Two identical windings in series double the turns, so the inductance goes up by four while the current rating halves because the wire is now shared in one path.
What is the volt-second rating?
The flux swing the core can take per switching cycle before saturation. At a given switching frequency it converts directly to the maximum applied voltage.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd