
| Parameter | Value |
|---|---|
| Orderable part number | CTX100-1-52-R |
| Horizontal mount version | CTX100-1-52LP-R |
| Header mount version | CTX100-1-52M-R |
| Inductance | 100.4 uH ±20% |
| DCR maximum @ +25 °C | 106 mOhm |
| Idc | 2.5 A |
| Isat | 2.4 A |
| Volt-time rating | 27.5 V-us |
| Energy at Isat | 197 uJ |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +105 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4304 |

Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
Closed magnetic path, low radiated field, and a high saturation current for the size: the toroid is the classic filter and energy-storage inductor for supplies that cannot afford a shielded can.
At 2.5 A the winding dissipates about 0.662 W in copper, using the 106 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.
Saturation is reached at 2.4 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
The core stores about 197 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.
The volt-time rating is 27.5 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.
Within the CTX100 family this is value 4 of 5, in a range that runs from 12 to 102 uH.
The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.
Why are there three part numbers per row?
Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.
What does the energy column mean?
The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.
Why are there three part numbers per row?
Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd