Eaton CTX100-2-52-R 101.7 uH Toroid Inductor, 4.4 A
Eaton CTX100-2-52-R 101.7 uH Toroid Inductor, 4.4 A

Eaton CTX100-2-52-R 101.7 uH Toroid Inductor, 4.4 A

Share
CTX100-2-52-R: toroid power inductor, 101.7 uH, 4.4 A, Isat 4.3 A, DCR 53.4 mOhm.
    • Product Details
    • Download

    Eaton CTX100-2-52-R 101.7 uH Toroid Inductor, 4.4 A

    CTX100-2-52-R at a glance: toroid power inductor, 101.7 uH, 4.4 A, Isat 4.3 A, DCR 53.4 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberCTX100-2-52-R
    Horizontal mount versionCTX100-2-52LP-R
    Header mount versionCTX100-2-52M-R
    Inductance101.7 uH ±20%
    DCR maximum @ +25 °C53.4 mOhm
    Idc4.4 A
    Isat4.3 A
    Volt-time rating35 V-us
    Energy at Isat643 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Dimensions and Pad Layout

    CTX100-2-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The winding on a toroid is distributed around the ring, which keeps the leakage field low and makes the part mechanically stable. The trade is assembly cost: the coil has to be wound through the hole, so toroids are hand- or machine-wound rather than printed.

    At 4.4 A the winding dissipates about 1.03 W in copper, using the 53.4 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 4.3 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 643 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 35 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX100 family this is value 5 of 5, in a range that runs from 12 to 102 uH.

    Where This Series Fits

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    Is the inductance stable with DC bias?
    It falls as the core approaches saturation. The DC current column is the rated point; above it the inductance drops faster.

    Why do toroids radiate less?
    The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products