Eaton CTX150-2-52-R 148.0 uH Toroid Inductor, 4.3 A
Eaton CTX150-2-52-R 148.0 uH Toroid Inductor, 4.3 A

Eaton CTX150-2-52-R 148.0 uH Toroid Inductor, 4.3 A

Share
CTX150-2-52-R: toroid power inductor, 148.0 uH, 4.3 A, Isat 4 A, DCR 71.9 mOhm.
    • Product Details
    • Download

    Eaton CTX150-2-52-R 148.0 uH Toroid Inductor, 4.3 A

    CTX150-2-52-R at a glance: toroid power inductor, 148.0 uH, 4.3 A, Isat 4 A, DCR 71.9 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberCTX150-2-52-R
    Horizontal mount versionCTX150-2-52LP-R
    Header mount versionCTX150-2-52M-R
    Inductance148.0 uH ±20%
    DCR maximum @ +25 °C71.9 mOhm
    Idc4.3 A
    Isat4 A
    Volt-time rating47.6 V-us
    Energy at Isat829 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Mechanical Dimensions & Pad Layout

    CTX150-2-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A toroid concentrates the magnetic path in a closed ring, so almost all of the flux stays inside the core. That is why toroids radiate little and why they are used where a filter inductor has to sit next to sensitive circuitry without a shield.

    At 4.3 A the winding dissipates about 1.33 W in copper, using the 71.9 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 4 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 829 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 47.6 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX150 family this is value 2 of 4, in a range that runs from 12.8 to 152 uH.

    Where This Series Fits

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    Why do toroids radiate less?
    The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.

    Why do toroids radiate less?
    The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.

    Why do toroids radiate less?
    The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products