
| Parameter | Value |
|---|---|
| Orderable part number | CTX250-2-52-R |
| Horizontal mount version | CTX250-2-52LP-R |
| Header mount version | CTX250-2-52M-R |
| Inductance | 251.1 uH ±20% |
| DCR maximum @ +25 °C | 83.3 mOhm |
| Idc | 4.2 A |
| Isat | 4.2 A |
| Volt-time rating | 66 V-us |
| Energy at Isat | 1540 uJ |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +105 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4304 |

Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
A toroid concentrates the magnetic path in a closed ring, so almost all of the flux stays inside the core. That is why toroids radiate little and why they are used where a filter inductor has to sit next to sensitive circuitry without a shield.
At 4.2 A the winding dissipates about 1.47 W in copper, using the 83.3 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.
Saturation is reached at 4.2 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
The core stores about 1540 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.
The volt-time rating is 66 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.
Within the CTX250 family this is value 3 of 3, in a range that runs from 9.2 to 251 uH.
The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.
What does the energy column mean?
The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.
Why are there three part numbers per row?
Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.
Why do toroids radiate less?
The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd