Eaton CTX50-10-52-R 13.9 uH Toroid Inductor 2960 V-us
Eaton CTX50-10-52-R 13.9 uH Toroid Inductor 2960 V-us

Eaton CTX50-10-52-R 13.9 uH Toroid Inductor 2960 V-us

Share
CTX50-10-52-R: toroid power inductor, 13.9 uH, 12.7 A, Isat 38.9 A, DCR – mOhm.
    • Product Details
    • Download

    Eaton CTX50-10-52-R 13.9 uH Toroid Inductor 2960 V-us

    CTX50-10-52-R at a glance: toroid power inductor, 13.9 uH, 12.7 A, Isat 38.9 A, DCR – mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberCTX50-10-52-R
    Horizontal mount versionCTX50-10-52LP-R
    Header mount version52.37
    Inductance13.9 uH ±20%
    Idc12.7 A
    Isat38.9 A
    Volt-time rating2960 V-us
    Energy at Isat0.012 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Dimensions and Pad Layout

    CTX50-10-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    This is a toroid power inductor with the winding on a closed ring core. Its useful numbers are the DC current, the saturation current, and the energy stored at saturation, which together describe how much transient the part can support.

    Saturation is reached at 38.9 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 0.012 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 2960 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX50 family this is value 1 of 5, in a range that runs from 13.9 to 52.3 uH.

    Positioning in the Range

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Is the inductance stable with DC bias?
    It falls as the core approaches saturation. The DC current column is the rated point; above it the inductance drops faster.

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products