Eaton CTX500-2-52-R 499.4 uH Toroid Power Choke
Eaton CTX500-2-52-R 499.4 uH Toroid Power Choke

Eaton CTX500-2-52-R 499.4 uH Toroid Power Choke

Share
CTX500-2-52-R: toroid power inductor, 499.4 uH, 3.1 A, Isat 3.3 A, DCR 183 mOhm.
    • Product Details
    • Download

    Eaton CTX500-2-52-R 499.4 uH Toroid Power Choke

    CTX500-2-52-R at a glance: toroid power inductor, 499.4 uH, 3.1 A, Isat 3.3 A, DCR 183 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberCTX500-2-52-R
    Horizontal mount versionCTX500-2-52LP-R
    Header mount versionCTX500-2-52M-R
    Inductance499.4 uH ±20%
    DCR maximum @ +25 °C183 mOhm
    Idc3.1 A
    Isat3.3 A
    Volt-time rating104 V-us
    Energy at Isat1890 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Outline Drawing

    CTX500-2-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a toroid power inductor with the winding on a closed ring core. Its useful numbers are the DC current, the saturation current, and the energy stored at saturation, which together describe how much transient the part can support.

    At 3.1 A the winding dissipates about 1.76 W in copper, using the 183 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 3.3 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 1890 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 104 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX500 family this is value 1 of 2, in a range that runs from 499 to 505 uH.

    What This Family Is For

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Why are there three part numbers per row?
    Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.

    Is the inductance stable with DC bias?
    It falls as the core approaches saturation. The DC current column is the rated point; above it the inductance drops faster.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products