Eaton DRQ74-8R2-R 1:1 Coupled Drum Core, 8.2 uH
Eaton DRQ74-8R2-R 1:1 Coupled Drum Core, 8.2 uH

Eaton DRQ74-8R2-R 1:1 Coupled Drum Core, 8.2 uH

Share
Eaton DRQ74-8R2-R: Dual Winding Shielded Drum Core Inductor, 8.2 uH, 2.53 A, DCR 44.1 mOhm.
    • Product Details
    • Download

    Eaton DRQ74-8R2-R 1:1 Coupled Drum Core, 8.2 uH

    DRQ74-8R2-R at a glance: dual-winding shielded drum core, 8.2 uH per winding, 2.53 A, DCR 44.1 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberDRQ74-8R2-R
    Rated inductance8.2 uH ±20%
    Open circuit inductance (OCL)8.57 uH
    Irms (40 °C rise)2.53 A
    Isat3.4 A
    DCR typical @ 20 °C44.1 mOhm
    Volt-microsecond rating9.23 V-us
    Series connection34.3 uH, 1.27 A
    Parallel connection8.2 uH, 2.53 A
    Turns ratio1:1, coupled
    Package7.6 x 7.6 mm footprint, 4.35 mm max height
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    A dual-winding drum core is a single core with two identical windings. Left uncoupled it is two chokes in one package; coupled, it becomes a 1:1 transformer for a SEPIC or a flyback, or a ripple-cancelling element in a multiphase converter.

    In parallel mode the two windings share the current and the DCR drops by half, which is why the parallel rating is roughly twice the single-winding rating rather than exactly twice: the thermal path is the same core.

    Isat is the peak current for approximately 30% rolloff at +20 °C. In a buck converter the inductor current peaks at the top of the ripple, so the peak - not the average - is the number that has to stay below Isat with margin for the transient.

    Positioning in the Range

    DRQ74 is the taller of the two 7.6 mm dual-winding parts at 4.35 mm, so it carries more current than DRQ73 in the same footprint. Two windings, series or parallel, 1:1 coupling when you want a transformer instead of a choke.

    • Typical applications: Multi-output converters, SEPIC and flyback, filter chokes, portable power, LCD backlighting.
    • Series connection gives 4x the inductance and half the current rating; parallel gives a quarter of the inductance and twice the current. Neither is a free lunch.
    • Data sheet DS4311.

    Design Notes

    8.2 uH sits in the middle of the range, and the trade at that point is explicit: 44.1 mOhm of DCR against 3.4 A of saturation headroom.

    The loss budget is the whole story with a power inductor: core loss grows with frequency and flux swing, copper loss grows with current, and the two meet at a different point for every inductance in the series.

    Frequently Asked Questions

    What is the OCL in parallel mode?
    With the windings paralleled the effective inductance is a quarter of the single-winding OCL; the datasheet lists the parallel rating explicitly.

    Can I use it as a flyback transformer?
    Yes, within the isolation and the 1:1 ratio. Check the reflected voltage and the leakage inductance, because leakage is what creates the spike on the switch node.

    Does the coupling ratio matter?
    Yes. The turns ratio is 1:1, and the ripple cancellation depends on it. A part with a different ratio is not interchangeable in a coupled design.

    Design note: decide the connection before you lay out the board. Parallel, series and coupled all use the same part, and the inductance moves by 4x between them.

    Mechanical Dimensions

    eaton-drq-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products