
| Parameter | Value |
|---|---|
| Orderable part number | EPM12V2-05R5-12R0P |
| Input voltage range | 3-14.4 Vdc |
| Output voltage | 0.6-5.5 Vdc |
| Output current at full load | 12 A |
| Efficiency, minimum | 91 % |
| Input current, no load | 30 mA |
| Capacitive load, maximum | 200 uF |
| Package | See dimension drawing |
| Operating temperature | -40 °C to +90 °C |
| Qualification | Industrial |
| RoHS | Compliant |
| Data sheet | Eaton Technical Data 11183 |
Mechanical drawing, derating curve and application circuits are on the
following pages of Eaton Technical Data 11183.
The part is a synchronous buck in a module: inductor, switches and controller in one package, with the output voltage set by an external divider. No compensation network is needed, which removes the usual loop-design step.
The EPM12 series covers 12 A and 1 A versions with a programmable 0.6-5.5 V output from a 3-14 V input.
Why non-isolated?
Because the load shares a ground with the input. Isolation would add a transformer and cost efficiency; a point-of-load converter does not need it.
Why non-isolated?
Because the load shares a ground with the input. Isolation would add a transformer and cost efficiency; a point-of-load converter does not need it.
How do I set the output voltage?
With an external resistor divider on the feedback pin. The data sheet gives the equation and the recommended values for common rails.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd