Eaton EPM78V2-12R0-01R0R Switching Regulator 12V
Eaton EPM78V2-12R0-01R0R Switching Regulator 12V

Eaton EPM78V2-12R0-01R0R Switching Regulator 12V

Share
EPM78V2-12R0-01R0R: Non-Isolated Step-Down Regulator, 15-32 V input, 12 V output, 1000 mA, 12 W.
    • Product Details
    • Download

    Eaton EPM78V2-12R0-01R0R Switching Regulator 12V

    EPM78V2-12R0-01R0R at a glance: Non-Isolated Step-Down Regulator, 15-32 V input, 12 V output, 1000 mA, 12 W.

    Ratings at a Glance

    ParameterValue
    Orderable part numberEPM78V2-12R0-01R0R
    Input voltage range15-32 Vdc
    Output voltage12 Vdc
    Output current at full load1000 mA
    Output power12 W
    Efficiency (max. / min. input)95.0/92.0 %
    Input current, no load23 mA
    Capacitive load, maximum470 uF
    PackageSIP
    Operating temperature-40 °C to +105 °C
    QualificationIndustrial
    RoHSCompliant
    Data sheetEaton Technical Data 11181

    Mechanical drawing, derating curve and application circuits are on the
    following pages of Eaton Technical Data 11181.

    The Figures Explained

    Six output voltages from 1.8 V to 15 V, all at 1 A, all in the same package with the same pinout. The input range depends on the output: a 1.8 V part accepts 4.75 V minimum, the 15 V part needs 18 V.

    The input has to stay above 15 V for a 12 V output, which is about 3.0 V of headroom at the minimum. Below that the module drops out like the linear regulator it replaces.

    Series Positioning

    The EPM78 series covers six fixed outputs from 1.8 V to 15 V at 1 A, all pin-compatible with the LM78xx footprint.

    • A switching regulator in a linear socket still needs the input capacitor. Without it the ripple specification does not hold.

    Frequently Asked Questions

    Why does the minimum input voltage depend on the output?
    Because the part is a step-down converter: the input has to stay above the output plus the dropout. A 15 V output needs 18 V in, a 1.8 V output needs 4.75 V.

    Why does the minimum input voltage depend on the output?
    Because the part is a step-down converter: the input has to stay above the output plus the dropout. A 15 V output needs 18 V in, a 1.8 V output needs 4.75 V.

    Can it replace a 7805 directly?
    Electrically yes, but check the pinout: some 78xx clones swap the pin order. The Eaton part follows the standard SIP sequence, and the input capacitor is still required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products