Eaton EXLA1V0605-1R8-R 1.8 AEC-Q200 Molded Inductor, 16 A
Eaton EXLA1V0605-1R8-R 1.8 AEC-Q200 Molded Inductor, 16 A

Eaton EXLA1V0605-1R8-R 1.8 AEC-Q200 Molded Inductor, 16 A

Share
Eaton EXLA1V0605-1R8-R: AEC-Q200 Automotive Molded Power Inductor, 1.8 uH, 16 A, DCR 6.4 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V0605-1R8-R 1.8 AEC-Q200 Molded Inductor, 16 A

    EXLA1V0605-1R8-R at a glance: AEC-Q200 molded inductor, 1.8 uH, 16 A Irms, Isat 13.5 A, DCR 6.4 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberEXLA1V0605-1R8-R
    OCL1.8 uH ±20%
    Irms16 A
    Isat (30% rolloff @ +25 °C)13.5 A
    DCR typical @ +25 °C6.4 mOhm
    DCR maximum @ +25 °C7.1 mOhm
    Rated operating voltage (across inductor)40 V
    Package7.4 x 7.1 mm footprint, 5.0 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Outline Drawing

    EXLA1V0605-1R8-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    What the Numbers Mean

    Automotive qualification on a moulded inductor means the mechanical construction is as carefully specified as the electrical one: the moulded body survives thermal cycling, the shield keeps EMI out of the radios, and the soft-saturation core keeps the rail alive through transients at temperature.

    Copper loss is the efficiency floor. 6.4 mOhm at 25 °C rises about 30% by 100 °C, so the hot-corner budget should use the maximum column, not the typical.

    Isat is defined as the peak current for approximately 30% rolloff at +25 °C. With an alloy powder core the rolloff is soft: past Isat the inductance keeps working, just lower - which is a design resource, not an excuse to run at the limit.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    Series Positioning

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1221; footprint 7.4 x 7.1 mm footprint, 5.0 mm height.

    Design Notes

    Frequently Asked Questions

    What is the temperature range?
    -55 °C to +155 °C, ambient plus self-temperature rise. The part should not exceed +155 °C under worst-case operating conditions.

    What is the rated operating voltage?
    A bias condition for characterisation (per size, 15 V or 40 V across the inductor). It is not an isolation rating.

    What is the temperature range?
    -55 °C to +155 °C, ambient plus self-temperature rise. The part should not exceed +155 °C under worst-case operating conditions.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v06-automotive-high-current-molded-inductor-data-sheet-elx1221-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products