Eaton EXLA1V0703-1R0-R Automotive Molded Power Inductor 1 uH
Eaton EXLA1V0703-1R0-R Automotive Molded Power Inductor 1 uH

Eaton EXLA1V0703-1R0-R Automotive Molded Power Inductor 1 uH

Share
Eaton EXLA1V0703-1R0-R: AEC-Q200 Automotive Molded Power Inductor, 1 uH, 21.8 A, DCR 4.55 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V0703-1R0-R Automotive Molded Power Inductor 1 uH

    EXLA1V0703-1R0-R at a glance: AEC-Q200 molded inductor, 1 uH, 21.8 A Irms, Isat 28 A, DCR 4.55 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberEXLA1V0703-1R0-R
    OCL1 uH ±20%
    Irms21.8 A
    Isat (30% rolloff @ +25 °C)28 A
    DCR typical @ +25 °C4.55 mOhm
    DCR maximum @ +25 °C5 mOhm
    Rated operating voltage (across inductor)40 V
    Package8.7 x 8.3 mm footprint, 3.1 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Dimensions and Pad Layout

    EXLA1V0703-1R0-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    What the Numbers Mean

    The automotive version of the moulded high-current inductor: AEC-Q200 qualified, magnetically shielded, soft-saturating alloy powder core, and rated to 155 °C ambient plus self-heating. Built for the power rails of ADAS modules, body electronics and vehicle infotainment.

    DCR 4.55 mOhm is the conduction loss: at rated current it dissipates 2.16 W, and that heat has to leave through the terminals and the board.

    Isat is the peak current for approximately 30% rolloff at +25 °C. Because the rolloff is gradual, the useful design question is not "what happens at Isat" but "how much inductance do I still have at my transient peak" - and the soft curve answers that with a usable number.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    Where This Series Fits

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1222; footprint 8.7 x 8.3 mm footprint, 3.1 mm height.

    Design Notes

    Frequently Asked Questions

    What does "soft saturation" mean in practice?
    The alloy powder core loses inductance gradually with current instead of collapsing. At transient peaks the inductor still limits di/dt - it is the behaviour that keeps a multiphase rail stable through load steps.

    Can I substitute it for the commercial EXL part of the same size?
    The electrical rows are close, but the qualification, temperature range and the test data are not interchangeable. Substitute on the datasheet row, not on the family name.

    What is the rated operating voltage?
    A bias condition for characterisation (per size, 15 V or 40 V across the inductor). It is not an isolation rating.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v07-automotive-high-current-molded-inductor-data-sheet-elx1222-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message