Eaton EXLA1V0703-2R2-R Automotive Molded Inductor 2.2 uH, 17 A Isat
Eaton EXLA1V0703-2R2-R Automotive Molded Inductor 2.2 uH, 17 A Isat

Eaton EXLA1V0703-2R2-R Automotive Molded Inductor 2.2 uH, 17 A Isat

Share
Eaton EXLA1V0703-2R2-R: AEC-Q200 Automotive Molded Power Inductor, 2.2 uH, 13 A, DCR 12.4 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V0703-2R2-R Automotive Molded Inductor 2.2 uH, 17 A Isat

    EXLA1V0703-2R2-R at a glance: AEC-Q200 molded inductor, 2.2 uH, 13 A Irms, Isat 17 A, DCR 12.4 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberEXLA1V0703-2R2-R
    OCL2.2 uH ±20%
    Irms13 A
    Isat (30% rolloff @ +25 °C)17 A
    DCR typical @ +25 °C12.4 mOhm
    DCR maximum @ +25 °C13.7 mOhm
    Rated operating voltage (across inductor)40 V
    Package8.7 x 8.3 mm footprint, 3.1 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Outline Drawing

    EXLA1V0703-2R2-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    The Figures Explained

    Between the battery and the load sits a rail that must survive cranking transients, thermal cycling and vibration. This AEC-Q200 moulded inductor is built for that point in the circuit: high current, low DCR, and a saturation curve that degrades gracefully.

    The typical and the maximum DCR are both quoted for a reason: production spread. A loss budget that has to hold across a build uses 12.4 mOhm as the optimistic case and plans against the maximum.

    Saturation on a powder core is a curve, not a cliff: Isat is the peak current for approximately 30% rolloff at +25 °C, and beyond it the inductance continues to fall smoothly. Budget the transient peak against the inductance you actually need, not against the part surviving.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    Series Positioning

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1222; footprint 8.7 x 8.3 mm footprint, 3.1 mm height.

    Design Notes

    Frequently Asked Questions

    Is this AEC-Q200 qualified?
    Yes - the family is qualified to the automotive passive-component standard, including the terminal-strength and vibration test methods referenced on the datasheet.

    Can I substitute it for the commercial EXL part of the same size?
    The electrical rows are close, but the qualification, temperature range and the test data are not interchangeable. Substitute on the datasheet row, not on the family name.

    What is the rated operating voltage?
    A bias condition for characterisation (per size, 15 V or 40 V across the inductor). It is not an isolation rating.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v07-automotive-high-current-molded-inductor-data-sheet-elx1222-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products