Eaton EXLA1V1006-3R3-R Automotive Molded Inductor 3.3 uH, 25 A Isat
Eaton EXLA1V1006-3R3-R Automotive Molded Inductor 3.3 uH, 25 A Isat

Eaton EXLA1V1006-3R3-R Automotive Molded Inductor 3.3 uH, 25 A Isat

Share
Eaton EXLA1V1006-3R3-R: AEC-Q200 Automotive Molded Power Inductor, 3.3 uH, 16.8 A, DCR 7 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V1006-3R3-R Automotive Molded Inductor 3.3 uH, 25 A Isat

    EXLA1V1006-3R3-R at a glance: AEC-Q200 molded inductor, 3.3 uH, 16.8 A Irms, Isat 25 A, DCR 7 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberEXLA1V1006-3R3-R
    OCL3.3 uH ±20%
    Irms16.8 A
    Isat (30% rolloff @ +25 °C)25 A
    DCR typical @ +25 °C7 mOhm
    DCR maximum @ +25 °C7.7 mOhm
    Rated operating voltage (across inductor)40 V
    Package12.2 x 11.3 mm footprint, 6.0 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Dimensions and Pad Layout

    EXLA1V1006-3R3-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    Reading the Data Sheet

    This is the part for automotive DC rails that cannot afford a collapsing inductor: AEC-Q200 qualified, soft saturation, shielded, and rated across the full -55 to +155 °C range. The electrical behaviour matches the commercial moulded family; the qualification and the temperature rating do not.

    DCR 7 mOhm is the conduction loss: at rated current it dissipates 1.98 W, and that heat has to leave through the terminals and the board.

    Saturation on a powder core is a curve, not a cliff: Isat is the peak current for approximately 30% rolloff at +25 °C, and beyond it the inductance continues to fall smoothly. Budget the transient peak against the inductance you actually need, not against the part surviving.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    Series Positioning

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1251; footprint 12.2 x 11.3 mm footprint, 6.0 mm height.

    Sizing and Layout Notes

    Frequently Asked Questions

    What is the rated operating voltage?
    A bias condition for characterisation (per size, 15 V or 40 V across the inductor). It is not an isolation rating.

    What does "soft saturation" mean in practice?
    The alloy powder core loses inductance gradually with current instead of collapsing. At transient peaks the inductor still limits di/dt - it is the behaviour that keeps a multiphase rail stable through load steps.

    Is this AEC-Q200 qualified?
    Yes - the family is qualified to the automotive passive-component standard, including the terminal-strength and vibration test methods referenced on the datasheet.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v10-automotive-high-current-molded-inductor-data-sheet-elx1251-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products