Eaton GMA-63-R 63 mA 250 Vac Fast-Acting Glass Fuse
Eaton GMA-63-R 63 mA 250 Vac Fast-Acting Glass Fuse

Eaton GMA-63-R 63 mA 250 Vac Fast-Acting Glass Fuse

Share
pEaton GMA-63-R — 63 mA, 250 V, fast-acting glass cartridge fuse, 35 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
    • Product Details
    • Download

    Eaton GMA-63-R 63 mA 250 Vac Fast-Acting Glass Fuse

    Eaton GMA-63-R 63 mA 250 Vac Fast-Acting Glass Fuse belongs to the Eaton range. It carries 63 mA, rated 250 Vac, uses a fast-acting element, in a glass body.

    Technical Data

    ParameterRating
    Part numberGMA-63-R
    Typical DC cold resistance15.75 Ω
    Maximum voltage drop4,700 mV
    Typical melting I2t0.00024 A²s
    Design standardUL/CSA 248-14
    Elementsingle element
    BodyGlass tube, 5 x 20 mm
    Voltage rating250 Vac
    End capssilver-plated brass 63-315 mA, nickel-plated 500 mA-15 A
    Rated current63 mA
    AC interrupting rating35 A at 250 Vac; 10,000 A at 125 Vac

    Design Notes

    • Interrupting capability is 35 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 63 mA to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV
    • surge

    Common Questions

    What are the ratings of the GMA-63-R?

    63 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac; 10,000 A at 125 Vac.

    Is the GMA-63-R fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the GMA-63-R be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products