Eaton GMC-800-R 800 mA Glass Tube Fuse, Medium Time-Lag, 250 Vac
Eaton GMC-800-R 800 mA Glass Tube Fuse, Medium Time-Lag, 250 Vac

Eaton GMC-800-R 800 mA Glass Tube Fuse, Medium Time-Lag, 250 Vac

Share
pEaton GMC-800-R — 800 mA, 250 V, time-delay glass cartridge fuse, 35 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
    • Product Details
    • Download

    Eaton GMC-800-R 800 mA Glass Tube Fuse, Medium Time-Lag, 250 Vac

    Built by Eaton, the GMC-800-R carries 800 mA, rated 250 Vac, uses a time-delay element, in a glass body.

    Technical Data

    ParameterRating
    Part numberGMC-800-R
    Design standardUL/CSA 248-14
    BodyGlass tube, 5 x 20 mm
    Elementsingle element
    Maximum voltage drop290 mV
    Typical DC cold resistance0.18 Ω
    AC interrupting rating35 A at 250 Vac; 10,000 A at 125 Vac
    Rated current800 mA
    Voltage rating250 Vac
    End capsnickel-plated brass
    Typical melting I2t0.85 A²s

    Selection Notes

    • Interrupting capability is 35 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
    • Time-delay element rides through motor starting and capacitive inrush without nuisance opening.
    • Startup surges of several times rated current are tolerated for a short window.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 800 mA to stop nuisance trips — fix the cause instead.

    Typical Applications

    Engineers usually specify it for these duties:

    • EV
    • adapter
    • surge

    Q&A

    What are the ratings of the GMC-800-R?

    800 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac; 10,000 A at 125 Vac.

    Is the GMC-800-R fast-acting or time-delay?

    It is time-delay. It tolerates short inrush surges.

    Can the GMC-800-R be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products