Eaton HCM1A0503-R20-R 0.20 uH AEC-Q200 Inductor, 15.8 A
Eaton HCM1A0503-R20-R 0.20 uH AEC-Q200 Inductor, 15.8 A

Eaton HCM1A0503-R20-R 0.20 uH AEC-Q200 Inductor, 15.8 A

Share
Eaton HCM1A0503-R20-R: AEC-Q200 automotive power inductor, 0.20 uH ±20%, 15.8 A Irms, Isat 18 A, DCR 2.1 mOhm, 5.5 x 5.3 mm.
    • Product Details
    • Download

    Eaton HCM1A0503-R20-R 0.20 uH AEC-Q200 Inductor, 15.8 A

    HCM1A0503-R20-R at a glance: AEC-Q200 automotive power inductor, 0.20 uH ±20%, 15.8 A Irms, Isat 18 A (20% rolloff @ +25 °C), DCR 2.1 mOhm, 5.5 x 5.3 mm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberHCM1A0503-R20-R
    OCL (open circuit inductance)0.20 uH ±20%
    FLL minimum, at Isat0.128 uH
    Irms (DC, 40 °C rise)15.8 A
    Isat (20% rolloff @ +25 °C)18 A
    DCR typical @ +20 °C2.1 mOhm
    DCR maximum @ +20 °C2.3 mOhm
    K-factor (Bp-p = K x L x dI)1,601, Bp-p in Gauss
    Package5.5 x 5.3 mm
    Height3.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10547

    Mechanical Dimensions & Pad Layout

    HCM1A0503-R20-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10547: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    The Figures Explained

    Automotive power rails ask for two things a commercial inductor does not always give: a qualified construction and a saturation curve that is still usable at the hot corner. The molded powder core here provides both, with AEC-Q200 qualification and a soft rolloff that keeps inductance present at transient peak current.

    Copper loss at the rated current works out to roughly 0.524 W from a typical DCR of 2.1 mOhm at 15.8 A. It is the number to start a thermal stack-up with, before core loss and before AC resistance rise.

    Isat is specified as 20% rolloff @ +25 °C, so the number is a rolloff criterion rather than an absolute maximum. The useful working range extends a little beyond it on a soft saturation core, but the loop compensation has to be designed for the inductance that remains.

    Stored energy at Isat is about 32.4 uJ, which is the energy the inductor hands to the load during a transient before the control loop reacts.

    The K-factor of 1,601 converts inductance and ripple into flux swing: each amp of peak-to-peak ripple moves the core through about 320 Gauss of Bp-p, the figure the core-loss curve is plotted against.

    Where This Series Fits

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    Of the 15 values listed for HCM1A0503, this is the 1th, in a family covering 0.2 uH to 10 uH.

    The next value up in the same family, HCM1A0503-R22-R, gives 0.22 uH at 15.8 A and DCR 2.1 mOhm: the extra inductance costs about 0 A of rated current.

    • Core material: alloy powder core, 5.5 x 5.3 mm body at 3.0 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Design Notes

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 2.3 mOhm becomes roughly 3.52 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Verify the qualification and the mounting process match the assembly line.
    • Verify the qualification and the mounting process match the assembly line.
    • Verify the part marking for revision traceability in production.

    Frequently Asked Questions

    What is the self-resonant frequency used for?
    It marks the point where the winding capacitance dominates. Keep the switching frequency and the harmonics that carry energy below it, and use it to compare candidates of the same inductance.

    Does the automotive grade change the electrical values?
    Not by itself, but it changes the qualification and often the temperature range. Compare the rows of the automotive data sheet against the commercial one rather than assuming they match.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products