Eaton HCM1A1307-120-R 12 uH Shielded Automotive Inductor
Eaton HCM1A1307-120-R 12 uH Shielded Automotive Inductor

Eaton HCM1A1307-120-R 12 uH Shielded Automotive Inductor

Share
Eaton HCM1A1307-120-R: AEC-Q200 automotive power inductor, 12 uH ±20%, 6.1 A Irms, Isat 11 A, DCR 17 mOhm, 13.7 x 13 mm.
    • Product Details
    • Download

    Eaton HCM1A1307-120-R 12 uH Shielded Automotive Inductor

    HCM1A1307-120-R at a glance: AEC-Q200 automotive power inductor, 12 uH ±20%, 6.1 A Irms, Isat 11 A (20% rolloff @ +25 °C), DCR 17 mOhm, 13.7 x 13 mm.

    Key Specifications

    ParameterValue
    Orderable part numberHCM1A1307-120-R
    OCL (open circuit inductance)12 uH ±20%
    FLL minimum, at Isat7.68 uH
    Irms (DC, 40 °C rise)6.1 A
    Isat (20% rolloff @ +25 °C)11 A
    DCR typical @ +20 °C17 mOhm
    DCR maximum @ +20 °C19 mOhm
    K-factor (Bp-p = K x L x dI)39, Bp-p in Gauss
    Package13.7 x 13 mm
    Height6.5 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10552

    Mechanical Drawing

    HCM1A1307-120-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10552: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    Reading the Data Sheet

    Molded, shielded, AEC-Q200: the family is built for under-hood and in-cabin electronics where the ambient can reach 125 °C and the board cannot afford a radiating inductor. Soft saturation means the transient current does not disappear the inductance, and the shielding keeps the switching harmonics off nearby sensor wiring.

    At the rated 6.1 A the winding dissipates about 0.633 W in copper alone, using the typical DCR of 17 mOhm. That figure is the floor of the loss budget: it assumes the current is pure DC, and any ripple adds to it.

    Isat is specified as 20% rolloff @ +25 °C, so the number is a rolloff criterion rather than an absolute maximum. The useful working range extends a little beyond it on a soft saturation core, but the loop compensation has to be designed for the inductance that remains.

    Stored energy at Isat is about 726 uJ, which is the energy the inductor hands to the load during a transient before the control loop reacts.

    The K-factor of 39 converts inductance and ripple into flux swing: each amp of peak-to-peak ripple moves the core through about 468 Gauss of Bp-p, the figure the core-loss curve is plotted against.

    Where This Series Fits

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    Within the HCM1A1307 family this is value 16 of 20, in a range that runs from 0.22 uH to 56 uH.

    The next value up in the same family, HCM1A1307-150-R, gives 15 uH at 5.5 A and DCR 22 mOhm: the extra inductance costs about 0.8 A of rated current.

    • Core material: alloy powder core, 13.7 x 13 mm body at 6.5 mm.
    • Typical applications: body electronics; central body control module; headlamps, tail lamps and interior lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control; advanced driver assistance systems.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Design Notes

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 19 mOhm becomes roughly 29.1 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Confirm the qualification file covers the module-level test plan.
    • Verify the part marking for revision traceability in production.
    • Check the hot-corner saturation margin against the worst-case load step.

    Frequently Asked Questions

    Does the automotive grade change the electrical values?
    Not by itself, but it changes the qualification and often the temperature range. Compare the rows of the automotive data sheet against the commercial one rather than assuming they match.

    Does the automotive grade change the electrical values?
    Not by itself, but it changes the qualification and often the temperature range. Compare the rows of the automotive data sheet against the commercial one rather than assuming they match.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products