Eaton HCM1A1707-150-R 15 uH Shielded Automotive Inductor
Eaton HCM1A1707-150-R 15 uH Shielded Automotive Inductor

Eaton HCM1A1707-150-R 15 uH Shielded Automotive Inductor

Share
Eaton HCM1A1707-150-R: AEC-Q200 automotive power inductor, 15 uH ±20%, 9 A Irms, Isat 14 A, DCR 14.5 mOhm, 17.5 x 17.2 mm.
    • Product Details
    • Download

    Eaton HCM1A1707-150-R 15 uH Shielded Automotive Inductor

    HCM1A1707-150-R at a glance: AEC-Q200 automotive power inductor, 15 uH ±20%, 9 A Irms, Isat 14 A (20% rolloff @ +25 °C), DCR 14.5 mOhm, 17.5 x 17.2 mm.

    Electrical Specifications

    ParameterValue
    Orderable part numberHCM1A1707-150-R
    OCL (open circuit inductance)15 uH ±20%
    FLL minimum, at Isat9.6 uH
    Irms (DC, 40 °C rise)9 A
    Isat (20% rolloff @ +25 °C)14 A
    DCR typical @ +20 °C14.5 mOhm
    DCR maximum @ +20 °C15.5 mOhm
    K-factor (Bp-p = K x L x dI)30, Bp-p in Gauss
    Package17.5 x 17.2 mm
    Height7.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10553

    Mechanical Drawing

    HCM1A1707-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10553: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    How to Read These Ratings

    This is the automotive version of the molded high-current inductor. The body is a molded powder core, the winding is shielded by the magnetic material itself, and the operating range runs to +155 °C. It is the part that goes on the DC-DC stages of body electronics, ADAS modules and infotainment head units.

    With 14.5 mOhm typical, the I-squared-R loss at the full 9 A rating is about 1.18 W. Compare that against the converter output power before deciding whether the part needs airflow or a copper pour under it.

    The Isat column is 20% rolloff @ +25 °C. Note what it does and does not mean: it is a defined rolloff point, not a destruction limit. Above it the inductance continues to fall, which is why the transient peak current should be checked against the curve, not just against the number.

    Stored energy at Isat is about 1,470 uJ, which is the energy the inductor hands to the load during a transient before the control loop reacts.

    The K-factor of 30 converts inductance and ripple into flux swing: each amp of peak-to-peak ripple moves the core through about 450 Gauss of Bp-p, the figure the core-loss curve is plotted against.

    Positioning in the Range

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    Of the 13 values listed for HCM1A1707, this is the 9th, in a family covering 1 uH to 68 uH.

    Compared with its neighbours in the table, HCM1A1707-220-R trades 4 A of rated current for the next inductance step, which is the usual compromise in this family.

    • Core material: alloy powder core, 17.5 x 17.2 mm body at 7.0 mm.
    • Typical applications: body electronics; central body control module; headlamps, tail lamps and interior lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control; advanced driver assistance systems.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Sizing It Into a Design

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 15.5 mOhm becomes roughly 23.7 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Check the hot-corner saturation margin against the worst-case load step.
    • Verify the qualification and the mounting process match the assembly line.
    • Confirm the qualification file covers the module-level test plan.

    Frequently Asked Questions

    Does the automotive grade change the electrical values?
    Not by itself, but it changes the qualification and often the temperature range. Compare the rows of the automotive data sheet against the commercial one rather than assuming they match.

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products