Eaton HCM1A4020V2-R22-R 0.22 uH AEC-Q200 Inductor, 11 A
Eaton HCM1A4020V2-R22-R 0.22 uH AEC-Q200 Inductor, 11 A

Eaton HCM1A4020V2-R22-R 0.22 uH AEC-Q200 Inductor, 11 A

Share
Eaton HCM1A4020V2-R22-R: AEC-Q200 automotive power inductor, 0.22 uH ±20%, 11 A Irms, Isat 17 A, DCR 5.5 mOhm, 4.75 x 4.45 mm.
    • Product Details
    • Download

    Eaton HCM1A4020V2-R22-R 0.22 uH AEC-Q200 Inductor, 11 A

    HCM1A4020V2-R22-R at a glance: AEC-Q200 automotive power inductor, 0.22 uH ±20%, 11 A Irms, Isat 17 A (20% rolloff @ +25 °C), DCR 5.5 mOhm, 4.75 x 4.45 mm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberHCM1A4020V2-R22-R
    OCL (open circuit inductance)0.22 uH ±20%
    FLL minimum, at Isat0.123 uH
    Irms (DC, 40 °C rise)11 A
    Isat (20% rolloff @ +25 °C)17 A
    DCR typical @ +20 °C5.5 mOhm
    DCR maximum @ +20 °C6.6 mOhm
    SRF typical200 MHz
    K-factor (Bp-p = K x L x dI)2,390, Bp-p in Gauss
    Package4.75 x 4.45 mm
    Height2.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10908

    Dimensions and Pad Layout

    HCM1A4020V2-R22-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10908: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    How to Read These Ratings

    AEC-Q200 qualified, molded, magnetically shielded, and rated to +155 °C ambient plus self-heating. The automotive grading is not a label on a commercial part: the test regime covers thermal shock, vibration and moisture, and the data sheet quotes the parameters at the temperature extremes the qualification demands.

    Copper loss at the rated current works out to roughly 0.665 W from a typical DCR of 5.5 mOhm at 11 A. It is the number to start a thermal stack-up with, before core loss and before AC resistance rise.

    Isat is specified as 20% rolloff @ +25 °C, so the number is a rolloff criterion rather than an absolute maximum. The useful working range extends a little beyond it on a soft saturation core, but the loop compensation has to be designed for the inductance that remains.

    Energy storage at the saturation current is around 31.8 uJ, the number that connects the inductance and the current rating into a single transient figure.

    With K = 2,390, a peak-to-peak ripple of one amp produces roughly 526 Gauss of flux swing. Read the core-loss graph at that amplitude and at the switching frequency to get the core contribution to the total loss.

    Self-resonant frequency is 200 MHz typical. Above that the part becomes capacitive and stops behaving as an inductor, which is why the switching frequency and its first harmonics should stay well below it.

    Where This Series Fits

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    In the HCM1A4020V2 line-up this part is number 2 of 15 by inductance, between 0.1 uH and 15 uH.

    One step down the table, HCM1A4020V2-R10-R, sits at 0.10 uH with 16 A and 3.1 mOhm – the lower inductance buys about 7.5 A of extra current in the same body.

    • Core material: alloy powder core, 4.75 x 4.45 mm body at 2.0 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Sizing and Layout Notes

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 6.6 mOhm becomes roughly 10.1 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Confirm the revision letter (base / V2 / V3) before comparing electrical rows.
    • Verify the qualification and the mounting process match the assembly line.
    • Verify the qualification and the mounting process match the assembly line.

    Frequently Asked Questions

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products