Eaton HCM1A4020V2-R56-R 0.56 uH Automotive Power Inductor
Eaton HCM1A4020V2-R56-R 0.56 uH Automotive Power Inductor

Eaton HCM1A4020V2-R56-R 0.56 uH Automotive Power Inductor

Share
Eaton HCM1A4020V2-R56-R: AEC-Q200 automotive power inductor, 0.56 uH ±20%, 7.3 A Irms, Isat 10 A, DCR 12 mOhm, 4.75 x 4.45 mm.
    • Product Details
    • Download

    Eaton HCM1A4020V2-R56-R 0.56 uH Automotive Power Inductor

    HCM1A4020V2-R56-R at a glance: AEC-Q200 automotive power inductor, 0.56 uH ±20%, 7.3 A Irms, Isat 10 A (20% rolloff @ +25 °C), DCR 12 mOhm, 4.75 x 4.45 mm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberHCM1A4020V2-R56-R
    OCL (open circuit inductance)0.56 uH ±20%
    FLL minimum, at Isat0.314 uH
    Irms (DC, 40 °C rise)7.3 A
    Isat (20% rolloff @ +25 °C)10 A
    DCR typical @ +20 °C12 mOhm
    DCR maximum @ +20 °C15 mOhm
    SRF typical95 MHz
    K-factor (Bp-p = K x L x dI)1,612, Bp-p in Gauss
    Package4.75 x 4.45 mm
    Height2.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10908

    Outline Drawing

    HCM1A4020V2-R56-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10908: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    The Figures Explained

    Molded, shielded, AEC-Q200: the family is built for under-hood and in-cabin electronics where the ambient can reach 125 °C and the board cannot afford a radiating inductor. Soft saturation means the transient current does not disappear the inductance, and the shielding keeps the switching harmonics off nearby sensor wiring.

    Copper loss at the rated current works out to roughly 0.639 W from a typical DCR of 12 mOhm at 7.3 A. It is the number to start a thermal stack-up with, before core loss and before AC resistance rise.

    Isat is specified as 20% rolloff @ +25 °C, so the number is a rolloff criterion rather than an absolute maximum. The useful working range extends a little beyond it on a soft saturation core, but the loop compensation has to be designed for the inductance that remains.

    Energy storage at the saturation current is around 28 uJ, the number that connects the inductance and the current rating into a single transient figure.

    With K = 1,612, a peak-to-peak ripple of one amp produces roughly 903 Gauss of flux swing. Read the core-loss graph at that amplitude and at the switching frequency to get the core contribution to the total loss.

    Self-resonant frequency is 95 MHz typical. Above that the part becomes capacitive and stops behaving as an inductor, which is why the switching frequency and its first harmonics should stay well below it.

    Where This Series Fits

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    In the HCM1A4020V2 line-up this part is number 5 of 15 by inductance, between 0.1 uH and 15 uH.

    The next value up in the same family, HCM1A4020V2-R68-R, gives 0.68 uH at 6.7 A and DCR 12.5 mOhm: the extra inductance costs about 0.6 A of rated current.

    • Core material: alloy powder core, 4.75 x 4.45 mm body at 2.0 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Sizing and Layout Notes

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 15 mOhm becomes roughly 23 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Confirm the qualification file covers the module-level test plan.
    • Verify the qualification and the mounting process match the assembly line.
    • Confirm the qualification file covers the module-level test plan.

    Frequently Asked Questions

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products