Eaton HFW1V2213H100K 10.0 uH Shielded Inductor 21 mOhm
Eaton HFW1V2213H100K 10.0 uH Shielded Inductor 21 mOhm

Eaton HFW1V2213H100K 10.0 uH Shielded Inductor 21 mOhm

Share
HFW1V2213H100K: high-current power inductor, 10.0 uH, 14 A, Isat 22 A, DCR 21 mOhm.
    • Product Details
    • Download

    Eaton HFW1V2213H100K 10.0 uH Shielded Inductor 21 mOhm

    HFW1V2213H100K at a glance: high-current power inductor, 10.0 uH, 14 A, Isat 22 A, DCR 21 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberHFW1V2213H100K
    Inductance10.0 uH ±20%
    DCR maximum @ +25 °C21 mOhm
    Irms (DC, 40 °C rise)14 A
    Isat22 A
    SRF typical3.9 MHz
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1331

    Outline Drawing

    HFW1V2213H100K mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1331: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    The part is built around a distributed-gap core: the energy is stored through the volume of the magnetic material rather than in a single discrete gap, which is what produces the gradual rolloff and the low fringing field. Copper loss and core loss are traded against each other in the winding and body proportions.

    At 14 A the winding dissipates about 4.12 W in copper, using the 21 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 22 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the HFW1V2213H100K family this is value 1 of 1, in a range that runs from 10 to 10 uH.

    What This Family Is For

    The power inductor family covers sub-microhenry to tens of microhenry at currents from a few amps to tens of amps, in shielded surface-mount bodies. The data sheet rows carry both typical and maximum DCR so the loss budget can be built either way.

    • DCR is quoted at +20 °C. Copper resistance rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: computing (pol/vrms); distributed power architectures; servers and workstations; lan / wan applications; game consoles.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three different numbers, three different checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL, not with the zero-bias value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products