Eaton HFW1V2815H3R3K 3.3 uH Shielded Inductor 66.9 mOhm
Eaton HFW1V2815H3R3K 3.3 uH Shielded Inductor 66.9 mOhm

Eaton HFW1V2815H3R3K 3.3 uH Shielded Inductor 66.9 mOhm

Share
HFW1V2815H3R3K: high-current power inductor, 3.3 uH, 27 A, Isat 30 A, DCR 66.9 mOhm.
    • Product Details
    • Download

    Eaton HFW1V2815H3R3K 3.3 uH Shielded Inductor 66.9 mOhm

    HFW1V2815H3R3K at a glance: high-current power inductor, 3.3 uH, 27 A, Isat 30 A, DCR 66.9 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberHFW1V2815H3R3K
    Inductance3.3 uH ±20%
    DCR maximum @ +25 °C66.9 mOhm
    Irms (DC, 40 °C rise)27 A
    Isat30 A
    SRF typical2.05 MHz
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1330

    Outline Drawing

    HFW1V2815H3R3K mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1330: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A shielded power inductor with a soft saturation curve: as the current rises the inductance droops rather than collapsing, so the regulator keeps control through a load transient. The molded body contains the field, which is why these parts can sit side by side on a multiphase rail without coupling into each other.

    At 27 A the winding dissipates about 48.8 W in copper, using the 66.9 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 30 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the HFW1V2815H3R3K family this is value 1 of 1, in a range that runs from 3.3 to 3.3 uH.

    What This Family Is For

    The power inductor family covers sub-microhenry to tens of microhenry at currents from a few amps to tens of amps, in shielded surface-mount bodies. The data sheet rows carry both typical and maximum DCR so the loss budget can be built either way.

    • DCR is quoted at +20 °C. Copper resistance rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: computing (pol/vrms); distributed power architectures; servers and workstations; lan / wan applications; game consoles.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three different numbers, three different checks.

    Frequently Asked Questions

    What is the difference between Irms and Isat?
    Irms is the DC current that produces the rated temperature rise. Isat is the peak current at which inductance has fallen by a defined percentage. A converter can run above Irms briefly but must stay inside Isat.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL, not with the zero-bias value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products