Welcome to our company!
Eaton ICL070D20 0.7 Ohm 20 mm NTC Inrush Current Limiter
Share
pEaton ICL070D20 — NTC inrush current limiter, 0.7 Ω at 25 °C, 18 A steady./p
- Product Details
- Download
Eaton ICL070D20 0.7 Ohm 20 mm NTC Inrush Current Limiter
The ICL070D20 from Eaton holds 0.7 ohm at 25 °C, passes up to 18 A steady, on a 20 mm disk.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | ICL070D20BIM (5.0 mm pitch) / ICL070D20CIM (7.5 mm pitch) |
| Zero-power resistance R25 | 0.7 Ohm at +25 C |
| Tolerance | M = plus/minus 20 % |
| Max steady current | 18 A |
| Beta (25/50) | 2650 K |
| Max capacitance at 240 Vac | 1,200 uF |
| Dissipation factor | 30 mW/C |
| Thermal time constant | 100 s |
| Body | D20 disk, epoxy sealed radial |
| Operating temperature | -40 C to +200 C |
| Environmental | Halogen free, Pb-free |
Practical Notes
- Limits capacitor and transformer inrush by dropping resistance as it heats.
- It does not interrupt a fault — pair it with a fuse or breaker upstream.
- Leave cooling time between power cycles so the disk returns to high resistance.
- Resistance at 25 °C sets the cold-start limiting; the hot value is far lower.
- A disk rated for a higher steady current runs cooler at the same load.
- Beta value 2650 K describes how sharply resistance falls with temperature.
- Continuous current must stay at or below 18 A or the disk self-heats.
Application Scenarios
Common installation contexts include:
- EV
- charging
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
