Welcome to our company!
Eaton ICL100D18 1 Ohm 18 mm NTC Inrush Current Limiter
Share
pEaton ICL100D18 — NTC inrush current limiter, 1 Ω at 25 °C, 14 A steady./p
- Product Details
- Download
Eaton ICL100D18 1 Ohm 18 mm NTC Inrush Current Limiter
Built by Eaton, the ICL100D18 holds 1 ohm at 25 °C, passes up to 14 A steady, on a 18 mm disk.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | ICL100D18BIM (5.0 mm pitch) / ICL100D18CIM (7.5 mm pitch) |
| Zero-power resistance R25 | 1 Ohm at +25 C |
| Tolerance | M = plus/minus 20 % |
| Max steady current | 14 A |
| Beta (25/50) | 2650 K |
| Max capacitance at 240 Vac | 800 uF |
| Dissipation factor | 25 mW/C |
| Thermal time constant | 90 s |
| Body | D18 disk, epoxy sealed radial |
| Operating temperature | -40 C to +200 C |
| Environmental | Halogen free, Pb-free |
Selection Notes
- Limits capacitor and transformer inrush by dropping resistance as it heats.
- It does not interrupt a fault — pair it with a fuse or breaker upstream.
- Leave cooling time between power cycles so the disk returns to high resistance.
- Resistance at 25 °C sets the cold-start limiting; the hot value is far lower.
- A disk rated for a higher steady current runs cooler at the same load.
- Beta value 2650 K describes how sharply resistance falls with temperature.
- Continuous current must stay at or below 14 A or the disk self-heats.
Typical Applications
Engineers usually specify it for these duties:
- EV
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
