Eaton LAN1VSOD24351C2 LAN Magnetics, 24 Pins
Eaton LAN1VSOD24351C2 LAN Magnetics, 24 Pins

Eaton LAN1VSOD24351C2 LAN Magnetics, 24 Pins

Share
LAN1VSOD24351C2: LAN transformer, 350 uH, dual port.
    • Product Details
    • Download

    Eaton LAN1VSOD24351C2 LAN Magnetics, 24 Pins

    LAN1VSOD24351C2 at a glance: LAN transformer, 350 uH, dual port.

    Specification Table

    ParameterValue
    Orderable part numberLAN1VSOD24351C2
    PortsDual
    Pins24
    Inductance350 uH
    Leakage inductance0.5 uH
    DCR maximum1.2 Ohm
    Inter-winding capacitance35 pF
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +85 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1373

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1373; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    This is a toroid-wound LAN transformer on an open header: surface mount, one winding per pair, centre tap brought out. Inductance is quoted with a DC bias condition because the PHY drives a bias current through the winding.

    Within the LAN1VSOD24351C2 family this is item 1 of 1 in the Eaton catalogue.

    Series Positioning

    The LAN range covers 100BASE-T through 10GBASE-T, single to quad port, with and without PoE, in open-header SMT packages.

    • The magnetics set the return loss and crosstalk floor of the link. A marginal part cannot be fixed in layout.
    • Typical applications: rj45 network interface card; ethernet switch, router; selv/elv equipment; smart tv; data centers.
    • Design note: insertion loss and return loss are band specifications. Compare curves at the band edges, not the typical number.

    Frequently Asked Questions

    Why is inductance quoted at a DC bias?
    The PHY or the PoE feed pushes a DC current through the winding, and the core saturates a little. The bias condition in the table is the one the number applies to; without it the figure is meaningless.

    Why is inductance quoted at a DC bias?
    The PHY or the PoE feed pushes a DC current through the winding, and the core saturates a little. The bias condition in the table is the one the number applies to; without it the figure is meaningless.

    What does 1CT:1CT mean?
    Centre-tapped to centre-tapped, one to one. Ethernet PHYs are designed around this ratio, so a different ratio changes the impedance seen by the PHY and the link will not meet its return loss specification.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message