Eaton LAN3VSOPD48151C2 LAN Magnetics, 48 Pins
Eaton LAN3VSOPD48151C2 LAN Magnetics, 48 Pins

Eaton LAN3VSOPD48151C2 LAN Magnetics, 48 Pins

Share
LAN3VSOPD48151C2: LAN transformer, dual port.
    • Product Details
    • Download

    Eaton LAN3VSOPD48151C2 LAN Magnetics, 48 Pins

    LAN3VSOPD48151C2 at a glance: LAN transformer, dual port.

    Specification Table

    ParameterValue
    Orderable part numberLAN3VSOPD48151C2
    PortsDual
    Pins48
    Leakage inductance0.5 uH
    DCR maximum35 Ohm
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +85 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1377

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1377; the package line above gives the body size where
    the data sheet states it.

    What the Numbers Mean

    A LAN transformer provides the isolation and the common mode rejection between the cable and the PHY. The turns ratio is fixed at 1CT:1CT for Ethernet, so the design work is in the inductance, the leakage and the inter-winding capacitance – those three set insertion loss, return loss and crosstalk.

    Within the LAN3VSOPD48151C2 family this is item 1 of 1 in the Eaton catalogue.

    Where This Series Fits

    The LAN range covers 100BASE-T through 10GBASE-T, single to quad port, with and without PoE, in open-header SMT packages.

    • The magnetics set the return loss and crosstalk floor of the link. A marginal part cannot be fixed in layout.
    • Typical applications: selv/elv equipment; ip telephones; wireless lan access point; iot, remote monitoring; smart tv.
    • Design note: insertion loss and return loss are band specifications. Compare curves at the band edges, not the typical number.

    Frequently Asked Questions

    Which port count do I need?
    One transformer per port. The single, dual and quad variants are the same magnetics repeated in one package, which is why the pin count scales with the port count.

    Does the part include the common mode choke?
    Only where the part number or the description says so. Many designs use a separate choke; the PoE variants with a CMC in the same package are marked as such.

    Which port count do I need?
    One transformer per port. The single, dual and quad variants are the same magnetics repeated in one package, which is why the pin count scales with the port count.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message