Eaton LD1-6R8-R 6.8 uH Drum Core Choke
Eaton LD1-6R8-R 6.8 uH Drum Core Choke

Eaton LD1-6R8-R 6.8 uH Drum Core Choke

Share
LD1-6R8-R: metalized drum core inductor, 6.8 uH, 1.41 A, Isat 1.56 A, DCR 117 mOhm.
    • Product Details
    • Download

    Eaton LD1-6R8-R 6.8 uH Drum Core Choke

    LD1-6R8-R at a glance: metalized drum core inductor, 6.8 uH, 1.41 A, Isat 1.56 A, DCR 117 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberLD1-6R8-R
    Inductance6.8 uH ±20%
    DCR maximum @ +25 °C117 mOhm
    Irms (DC, 40 °C rise)1.41 A
    Isat1.56 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4310

    Dimensions and Pad Layout

    LD1-6R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4310: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a wound inductor on a drum core with metalized terminations. The value range runs from about a microhenry into the tens of microhenry, which puts it in the region where a multilayer part would need too many turns to be practical.

    At 1.41 A the winding dissipates about 0.233 W in copper, using the 117 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 1.56 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the LD1 family this is value 10 of 27, in a range that runs from 1 to 330 uH.

    Positioning in the Range

    The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.

    • The open magnetic path means nearby metal changes the inductance. Keep the specified clearance to shields and screws.
    • Typical applications: buck or boost inductor; noise filtering and output filter chokes; computers; power supplies; test equipment instrumentation smd device.
    • Design note: the value tolerance is wide by design; do not build a resonant circuit around the nominal inductance without checking the band.

    Frequently Asked Questions

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Can it be used in a switching converter?
    Yes, within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products