Eaton LDS0705-220M-R 21.53 uH Drum Core Choke
Eaton LDS0705-220M-R 21.53 uH Drum Core Choke

Eaton LDS0705-220M-R 21.53 uH Drum Core Choke

Share
LDS0705-220M-R: metalized drum core inductor, 21.53 uH ±20%, 1.66 A, Isat 1.71 A, DCR 84 mOhm.
    • Product Details
    • Download

    Eaton LDS0705-220M-R 21.53 uH Drum Core Choke

    LDS0705-220M-R at a glance: metalized drum core inductor, 21.53 uH ±20%, 1.66 A, Isat 1.71 A, DCR 84 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberLDS0705-220M-R
    Inductance21.53 uH ±20%
    DCR maximum @ +25 °C84 mOhm
    Irms (DC, 40 °C rise)1.66 A
    Isat1.71 A
    K-factor5
    Package7.8 x 7 x 5 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4142

    Dimensions and Pad Layout

    LDS0705-220M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4142: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    A metalized drum core inductor is a wound coil on a drum-shaped ferrite core, with the winding metalized or the core coated so the part can be handled and soldered. It gives more inductance per volume than a multilayer part at the cost of a larger body and a more open magnetic path.

    At 1.66 A the winding dissipates about 0.231 W in copper, using the 84 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 1.71 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the LDS0705 family this is value 10 of 19, in a range that runs from 0.861 to 467 uH.

    What This Family Is For

    The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.

    • The open magnetic path means nearby metal changes the inductance. Keep the specified clearance to shields and screws.
    • Typical applications: buck or boost inductor; noise filtering and output filter chokes; battery power, dc-dc converters; notebook and laptop power; hand held devices.
    • Design note: the value tolerance is wide by design; do not build a resonant circuit around the nominal inductance without checking the band.

    Frequently Asked Questions

    Why use a drum core rather than a molded part?
    More inductance per unit cost in the mid range, and a wider value selection. The trade is a more open magnetic path and a larger body.

    What is the rated current based on?
    A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products