Eaton LDS0705-2R2M-R 2.13 uH Metalized Inductor, Isat 5.45 A
Eaton LDS0705-2R2M-R 2.13 uH Metalized Inductor, Isat 5.45 A

Eaton LDS0705-2R2M-R 2.13 uH Metalized Inductor, Isat 5.45 A

Share
LDS0705-2R2M-R: metalized drum core inductor, 2.13 uH ±20%, 5.06 A, Isat 5.45 A, DCR 9 mOhm.
    • Product Details
    • Download

    Eaton LDS0705-2R2M-R 2.13 uH Metalized Inductor, Isat 5.45 A

    LDS0705-2R2M-R at a glance: metalized drum core inductor, 2.13 uH ±20%, 5.06 A, Isat 5.45 A, DCR 9 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberLDS0705-2R2M-R
    Inductance2.13 uH ±20%
    DCR maximum @ +25 °C9 mOhm
    Irms (DC, 40 °C rise)5.06 A
    Isat5.45 A
    K-factor15.8
    Package7.8 x 7 x 5 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4142

    Dimensions and Pad Layout

    LDS0705-2R2M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4142: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a wound inductor on a drum core with metalized terminations. The value range runs from about a microhenry into the tens of microhenry, which puts it in the region where a multilayer part would need too many turns to be practical.

    At 5.06 A the winding dissipates about 0.23 W in copper, using the 9 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 5.45 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the LDS0705 family this is value 3 of 19, in a range that runs from 0.861 to 467 uH.

    Series Positioning

    The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.

    • The open magnetic path means nearby metal changes the inductance. Keep the specified clearance to shields and screws.
    • Typical applications: buck or boost inductor; noise filtering and output filter chokes; battery power, dc-dc converters; notebook and laptop power; hand held devices.
    • Design note: the value tolerance is wide by design; do not build a resonant circuit around the nominal inductance without checking the band.

    Frequently Asked Questions

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Is the part shielded?
    The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products