Eaton LTA1VS16C-351-R LAN Magnetics, 16 Pins
Eaton LTA1VS16C-351-R LAN Magnetics, 16 Pins

Eaton LTA1VS16C-351-R LAN Magnetics, 16 Pins

Share
LTA1VS16C-351-R: LAN transformer, 350 uH, single port.
    • Product Details
    • Download

    Eaton LTA1VS16C-351-R LAN Magnetics, 16 Pins

    LTA1VS16C-351-R at a glance: LAN transformer, 350 uH, single port.

    Specification Table

    ParameterValue
    Orderable part numberLTA1VS16C-351-R
    PortsSingle
    Pins16
    Inductance350 uH
    Leakage inductance0.5 uH
    DCR maximum1.2 Ohm
    Inter-winding capacitance35 pF
    Insertion loss-1.1 dB @ 0.5-100 MHz
    Return loss-18 dB @ 0.5-30 MHz
    Crosstalk-30 dB @ 0.5-100 MHz
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1396

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1396; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    This is a toroid-wound LAN transformer on an open header: surface mount, one winding per pair, centre tap brought out. Inductance is quoted with a DC bias condition because the PHY drives a bias current through the winding.

    Insertion loss of -1.1 dB @ 0.5-100 MHz is the figure that matters at the band edge; the inductance value only guarantees the low-frequency corner.

    Within the LTA1VS16C family this is item 1 of 1 in the Eaton catalogue.

    Positioning in the Range

    The LAN range covers 100BASE-T through 10GBASE-T, single to quad port, with and without PoE, in open-header SMT packages.

    • The magnetics set the return loss and crosstalk floor of the link. A marginal part cannot be fixed in layout.
    • Typical applications: t-box; 10base-t/100base-tx interface; infotainment; battery management systems.
    • Design note: insertion loss and return loss are band specifications. Compare curves at the band edges, not the typical number.

    Frequently Asked Questions

    What is CWW?
    Inter-winding capacitance. It is the path that lets common mode noise through the transformer, so lower is better for EMC. It is a construction parameter, not something the layout can fix.

    What is CWW?
    Inter-winding capacitance. It is the path that lets common mode noise through the transformer, so lower is better for EMC. It is a construction parameter, not something the layout can fix.

    What does 1CT:1CT mean?
    Centre-tapped to centre-tapped, one to one. Ethernet PHYs are designed around this ratio, so a different ratio changes the impedance seen by the PHY and the link will not meet its return loss specification.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message