Eaton MCL1608V2-391-R 390.0 nH SMD Inductor, SRF 8 MHz
Eaton MCL1608V2-391-R 390.0 nH SMD Inductor, SRF 8 MHz

Eaton MCL1608V2-391-R 390.0 nH SMD Inductor, SRF 8 MHz

Share
MCL1608V2-391-R: multilayer chip inductor, 390.0 nH 150, Q 100, SRF 8 MHz, 3 mA, DCR 300000 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V2-391-R 390.0 nH SMD Inductor, SRF 8 MHz

    MCL1608V2-391-R at a glance: multilayer chip inductor, 390.0 nH 150, Q 100, SRF 8 MHz, 3 mA, DCR 300000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCL1608V2-391-R
    Inductance390.0 nH 150
    Q minimum100
    DCR maximum @ +25 °C300000 mOhm
    Rated current maximum3 mA
    SRF minimum8 MHz
    Test frequency50 MHz
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10927

    Mechanical Dimensions & Pad Layout

    MCL1608V2-391-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10927: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 390.0 nH 150 with a minimum Q of 100 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 100 means the part’s loss is about 1 % of its reactance in that band.

    Self-resonance is quoted as 8 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 8 MHz is the design headroom.

    Within the MCL1608V2 family this is value 32 of 34, in a range that runs from 0.001 to 0.47 nH.

    Where This Series Fits

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products